Before Mods
Oldest pictures I could find.
Oldest pictures I could find.
Yawar's Build (pics + vids): *in progress*
As it sits right now:
![]()
![]()
Username: FrontierNation3
Year: 2006
Make: Nissan
Model: Frontier
Trim: CC Short bed, NISMO
Color: Black
Mods:
Interior:
-Pioneer E Class Speakers
-Magellan 3045-LM Navigation System
-Kicker 4AWG Wiring
-Pioneer GM-D8500 Mono Amplifier
-Kicker Comp CVR dual 12" Subs (wired at 2ohm)
-Pioneer AVH-P3200DVD in dash DVD Reciever
-DashTex Dashboard cover
Exterior:
-Red Brake Calipers
-20% 3M Front window, rear window tint
-6000K HID headlights/fogs
-PIAA High/low Headlights
-Billet Alumminum grille
-Debadged tailgate
-Morimoto 5000K HID Retrofitted Projectors
-Boyo Vision Front view camera
-TFT LCD Screen with 2 inputs
-Front grill marker lights
-Stubby Antenna
-PIAA Fog lights in ShrockWorks bumper
Drivetrain: Stock
Suspension & Tires:
-Radflo 2.0 Standard travel coilovers front (650#)
-Radflo 2.0 Emulsion shocks for rear
-Alcan 1" Springs (ordered)
-20" MB Motoring Gunner 6 AM Rims
-Cooper Zeon Ltz 275/60r20 Tires
-Titan 17" OF Wheels for winter
Armor:
-Shrockworks Rear bumper
-Shrockworks Differential cover
-Shrockworks Front bumper with Prerunner bar
Performance:
-Banks Monster Exhaust system
Gear and Other:
-LED Blue dome lights
-LED 6000K Licence plate lights
-V-LED dome lights
In Progress:
-Light bar for roof (teaser)
-ShrockWorks Rock Sliders
*RED indicates what's no longer on/in my truck because it either looked stupid or was illegal.
Username: FrontierNation3
Year: 2006
Make: Nissan
Model: Frontier
Trim: CC Short bed, NISMO
Color: Black
Mods:
Interior:
-Pioneer E Class Speakers
-Magellan 3045-LM Navigation System
-Kicker 4AWG Wiring
-Pioneer GM-D8500 Mono Amplifier
-Kicker Comp CVR dual 12" Subs (wired at 2ohm)
-Pioneer AVH-P3200DVD in dash DVD Reciever
-DashTex Dashboard cover
Exterior:
-Red Brake Calipers
-20% 3M Front window, rear window tint
-6000K HID headlights/fogs
-PIAA High/low Headlights
-Billet Alumminum grille
-Debadged tailgate
-Morimoto 5000K HID Retrofitted Projectors
-Boyo Vision Front view camera
-TFT LCD Screen with 2 inputs
-Front grill marker lights
-Stubby Antenna
-PIAA Fog lights in ShrockWorks bumper
Drivetrain: Stock
Suspension & Tires:
-Radflo 2.0 Standard travel coilovers front (650#)
-Radflo 2.0 Emulsion shocks for rear
-Alcan 1" Springs (ordered)
-20" MB Motoring Gunner 6 AM Rims
-Cooper Zeon Ltz 275/60r20 Tires
-Titan 17" OF Wheels for winter
Armor:
-Shrockworks Rear bumper
-Shrockworks Differential cover
-Shrockworks Front bumper with Prerunner bar
Performance:
-Banks Monster Exhaust system
Gear and Other:
-LED Blue dome lights
-LED 6000K Licence plate lights
-V-LED dome lights
In Progress:
-Light bar for roof (teaser)
-ShrockWorks Rock Sliders
*RED indicates what's no longer on/in my truck because it either looked stupid or was illegal.
2
1 - 20 of 164 Posts
Audio
Head unit, subwoofers and blue LED's. Got rid of the subwoofers and LED's.
Head unit, subwoofers and blue LED's. Got rid of the subwoofers and LED's.
Attachments
Wheels and Tires
Old set up of wheels and tires and 2.5"F 1.5"R leveling kit. Got rid of this set-up as well.
Old set up of wheels and tires and 2.5"F 1.5"R leveling kit. Got rid of this set-up as well.
Attachments
Summer/Fall 2011 Pictures
Pictures, including the 6000K HID lights. Got rid of the gay blinding lights as well, for some sweet PIAA headlights.
Pictures, including the 6000K HID lights. Got rid of the gay blinding lights as well, for some sweet PIAA headlights.
Attachments
Hit a pole, so ordered a Shrockworks bumper. Decided I needed a front to match, so ordered a Front Shrock bumper. Then needed to get lifted so the bumpers look better. Can't lift without getting bigger tires (and smaller wheels)...and the cycle continues....
Attachments
Well, turns out the buyer who I originally sold this truck to, could not come up with the money quick enough. I talked to the wife and other friends, and decided to keep this truck just purely as a nice project car. I am pretty young and have never owned a car just to fool around with, so this will be my first. I still went ahead and purchased a 2006 Nissan 350z with only 6K miles on it as my daily driver! 
Just a quick update, I have garaged this beast until I recieve a few packages and get things taken care of. I am STILL waiting for my Shrockworks rear bumper (going on 15 weeks) and will put that and the rear differential cover on. I had a bit of rear quarter panel body damage I am taking care of next week. While I am at the body shop, I will also get rid of those hideous window visors (paint will be peeled, so getting it re-painted and fixed up). I ordered a Shrockworks front bumper (with prerunner bar and winch) as well as the rock sliders. I will be ordering the PRG Advanced Coilover kit (upper a-arms, radflo's, bils rear shocks, 2 inch AAL) next week, to take care of my awful suspension. Right now I am running 2.5" front and 1.5" rear, but will be upgrading to 3" front and 2" rear. The shrockworks front bumper will bring it down about .25" though. I might go Fabtech 6" Lift in the future, but not for now. Side note: I will have front spacers, rear blocks, front bumper, front HID 6000K fog lights and front grill for sale soon, whenever I recieve these new products. Please contact me beforehand for purchasing them from me.
As soon as I recieve and put on my rear bumper, I am getting a back up camera put on (going to the in dash reciever already there) as well as an alarm/remote start. This should be done the middle of next month, along with the bed cover, volant intake and superchips. Rigid industries 40" light bar should be on soon also, attached via the roof rack. Talking to a couple buddies about throwing some massive subwoofers in custom boxes in the bed (about 6 12's or 4 15's is what I have in mind). If this is the case, second battery/alternator will be added soon.
Just a quick update, I have garaged this beast until I recieve a few packages and get things taken care of. I am STILL waiting for my Shrockworks rear bumper (going on 15 weeks) and will put that and the rear differential cover on. I had a bit of rear quarter panel body damage I am taking care of next week. While I am at the body shop, I will also get rid of those hideous window visors (paint will be peeled, so getting it re-painted and fixed up). I ordered a Shrockworks front bumper (with prerunner bar and winch) as well as the rock sliders. I will be ordering the PRG Advanced Coilover kit (upper a-arms, radflo's, bils rear shocks, 2 inch AAL) next week, to take care of my awful suspension. Right now I am running 2.5" front and 1.5" rear, but will be upgrading to 3" front and 2" rear. The shrockworks front bumper will bring it down about .25" though. I might go Fabtech 6" Lift in the future, but not for now. Side note: I will have front spacers, rear blocks, front bumper, front HID 6000K fog lights and front grill for sale soon, whenever I recieve these new products. Please contact me beforehand for purchasing them from me.
As soon as I recieve and put on my rear bumper, I am getting a back up camera put on (going to the in dash reciever already there) as well as an alarm/remote start. This should be done the middle of next month, along with the bed cover, volant intake and superchips. Rigid industries 40" light bar should be on soon also, attached via the roof rack. Talking to a couple buddies about throwing some massive subwoofers in custom boxes in the bed (about 6 12's or 4 15's is what I have in mind). If this is the case, second battery/alternator will be added soon.
HAHA I am an idiot, I know.
But, yea that will be awesome! I should get the suspension very soon, and will definitly need help on it. I was originally planning on purchasing a brand new sports car (newer chargers, 370z's, etc.) but found the 350z for a great price and very low mileage! Could not resist. I had a sudden urgency to sell the truck, found someone who would purchase it for a decent price as is but could he not come up with all of the money. So, figured I would keep it as a nice project truck= Shrock it out and make it unique! Went on a buying spree and got some new toys for it.
When I get all of my packages, I will bring it up to you guys in PA and we can work on both of our trucks there. I'll get the beer, you get the tools ready
But, yea that will be awesome! I should get the suspension very soon, and will definitly need help on it. I was originally planning on purchasing a brand new sports car (newer chargers, 370z's, etc.) but found the 350z for a great price and very low mileage! Could not resist. I had a sudden urgency to sell the truck, found someone who would purchase it for a decent price as is but could he not come up with all of the money. So, figured I would keep it as a nice project truck= Shrock it out and make it unique! Went on a buying spree and got some new toys for it.
When I get all of my packages, I will bring it up to you guys in PA and we can work on both of our trucks there. I'll get the beer, you get the tools ready
Shrockworks Rear Bumper installed
Quick update: Got the Shrock Bumper in 3 days ago. Got it on last night. Really love it! You can view the thread here. Here are some pics of it:
![]()
![]()
![]()
Quick update: Got the Shrock Bumper in 3 days ago. Got it on last night. Really love it! You can view the thread here. Here are some pics of it:
3
1 - 20 of 164 Posts
