[LanceSlide]

Any one have to replace their wheel hubs? i guess my offset is too wide and it gave up after 70K. If anyone happens to have some laying around let me know. Thanks

 

[dubie2003]

The only 2 members that I have read about changing their front hubs has been Bwarren and Rusty.gh (sp?).

The crappy part is that the hubs are not rebuildable. You must replace it as a whole since the ABS is inside of it and etc.... I also don't know if any aftermarket companies make anything as a replacement yet.

 

[LanceSlide]

I noticed they were non serviceable. but cheapest i've seen was $150 per side and i feel it break again hopefully their will be a better alternative by then

 

[dubie2003]

That sounds about right on the price. Have you thought about a Tswap thou? I surf on CT and I have yet to see a thread that someone was complaining about wheel hubs/bearings.

 

[LanceSlide]

its the bolt pattern im worried about for the mean time. Im running 15's so when i jump to 17 i'll upgrade front and rear to the Titan stuff but a used hub should get me by till i need new tires

 

[dubie2003]

its the bolt pattern im worried about for the mean time. Im running 15's so when i jump to 17 i'll upgrade front and rear to the Titan stuff but a used hub should get me by till i need new tires

After I posted the Titan swap idea I realized you just spent some coin on new tires for the 15s so going used on the hubs should get you by until you need tires again and then a Tswap is more economical.

 

[Rusty.gh]

I've replaced three total, one myself.
When I had the 33's plus spindals and 2" spacers and I ride the truck like a race car.

Best price was $146.99 worst was something crazy like $295 plus labor at pep-boys. However that was a one year and it went out again, second time pep-boys didn't charge a dime.

All of them were made by timken. It's all bolt up nothing to adjust.

www partsgeek dot com Timken Wheel Hub Assembly

Your Price: $155.88 Select Year 2005 2006
Part Number: 18397-05069535
Notes: Axle Bearing and Hub Assembly -- Hub Unit Bearing

 

[frogboyjimmy]

i just replaced my hubs brakes spindles and everything else with titan stuff i can double check if my old shits still at the shop...