[RobFrisco415]

Will install this weekend time & weather permitting. View attachment 367298

Sent from my SM-A136U using Tapatalk

which tubing did you go with? I love my WK sliders! I added grip tape to mine as they are HELLA slippery when wet... used this here:

Amazon.com

it was enough to do both sides and the kickout.... these things protected me from a drugged up guy who ran into my truck... if it wasn't for these, my entire side of the truck would have been wiped out.... great stuff, worth every penny!!

 

[Grampy Matt]

Will install this weekend time & weather permitting. View attachment 367298

Sent from my SM-A136U using Tapatalk

member @raine has a write up on his website Project: Keira [Raine's 2014 Nissan Frontier 4X4] on the install that I followed when I did mine, worked well and all my drill holes lined up perfect, he had some good tips to get the holes just right.

 

[Snakebait]

Will install this weekend time & weather permitting. View attachment 367298

Sent from my SM-A136U using Tapatalk

Can you send to my house in California ....👍

 

[Skinny06]

Working on better RTT brackets, tunnel and awning mount brackets today. Also laying out all auxiliary lighting and getting a plan for the wiring of that. Total of 5 lights, one scene/cargo light on each side of the truck, two driving combo lights, and one spot in the center. All being mounted in my roof rack.

http://imgur.com/a/7uMQphv

 

[davedibbs]

Now those look nice!

 

[davedibbs]

Will install this weekend time & weather permitting.

Sent from my SM-A136U using Tapatalk

Nice!

 

[21 Frontier]

Installed pretty straight forward. Have to drill 6 holes in the frame on each side. Fortunately, I was able to use the asfir skid plate cross member as the backing plate on the middle mount. I was relieved I didn't have to cut stuff up to make the two work together.

Sent from my SM-A136U using Tapatalk

 

[Grumpy Shihtzu]

Went to Wally World and got an oil change. They're running a Quaker State Full Synthetic special for $44.95. It's $10 cheaper than Pennzoil.

 

[Zero Six LE]

Went to Wally World and got an oil change. They're running a Quaker State Full Synthetic special for $44.95. It's $10 cheaper than Pennzoil.

I wouldn't let Walmart change the oil in my lawn mower.

 

[TWX]

No pics, but decided to just rattle-can the custom hitch. I might later add on to it so I didn't want to go through the expense and aggravation of powdercoating it when I might end up having to grind the surface off to weld more material on.

Went with the $10.99/can separate primer and paint, just a satin black for the latter. Figured the difference in price between the cheap paint and the expensive paint wasn't enough to bother about and if I don't end up adding to it then the expensive paint might hold up for the long term better.

So primered it yesterday afternoon, then after the primer flashed-over but before it had completely dried I put on the first coat of paint. Then recoated again this afternoon. I might do a third coat to use up the paint, haven't decided. Storing used aerosol cans for the long term seems fairly hit-or-miss.

 

[Grumpy Shihtzu]

I wouldn't let Walmart change the oil in my lawn mower.

I've been going there for 10+ years. Never had an issue. They also service my Juke and my brother's Titan & Pathfinder.

 

[Zero Six LE]

I've been going there for 10+ years. Never had an issue. They also service my Juke and my brother's Titan & Pathfinder.

You're much braver than I would be. I wouldn't use the quick oil change businesses either.

 

[Grampy Matt]

I wouldn't use the quick oil change businesses either.

I did once after my knee surgery because I couldn't do it myself and then when I could, I had to use a 1/2" breaker bar to get the drain plug loose,

 

[bryce0lynch]

I finished up my underhood mount of a Viair 88p compressor. Next up is a HAM radio.

This is based around the one that @IAm_Not_Lost did here. Many thanks to him for blazing this trail!

Engine bay mounted air compressor

I have used a Viair 88p portable compressor for a while now, works well, fills up tires lretty quick. Got tired of it rattling around and taking up room in the bed. The only place that it easily fit was behind the left headlight and in front of the airbox. It has a 2.5” or so cylindrical body...

www.clubfrontier.org

War Rocket AJAX

I just added finished up adding the house battery to the truck bed/camper. CHINS 100 amp hour. It's connected to a Renogy 30amp DC-DC charger. AWG, in split loom (god I hate putting wire in split loom ...) run from the battery to a 40amp fuse under the hood. I pick up the AWG6 ground I ran to a...

www.clubfrontier.org

 

[Skinny06]

Got the awning brackets made and awning mounted. Also got the tunnel entry mounting done. Plan for lighting is also in motion. Not a bad day, ended with a couple All Day IPAs and a Oliva box press.

This setup will be a definite game changer coming from our Oztent.

 

[BAW1967]

Black Flag Sunday. She needs a bath I know.

 

[BAW1967]

Had the parking pawl and TCM recall taken care of finally. Took about 4 hours total.

Still waiting for my pawl to come in. Three months and counting……..

 

[NCalFrontier]

Belt and belt tensioner on my 2016 4.0 @82k miles. Could no longer stand the squeak from the OEM tensioner on the cold/wet mornings.

 

[Snakebait]

Finished installing backup camera on my Frontier today. Mounted camera under tailgate handle, didn't like that location so i moved it to the license plate. Plug and play is what the ad stated. Three phone call to technical support and it works now. It was a big pain in the a$$ but got it done. Like i stated in one of my posts, it fights me to the bitter end. Yes just one nut or bolt or wire connection or whatever.

 

[Zero Six LE]

Finished installing backup camera on my Frontier today. Mounted camera under tailgate handle, didn't like that location so i moved it to the license plate. Plug and play is what the ad stated. Three phone call to technical support and it works now. It was a big pain in the a$$ but got it done. Like i stated in one of my posts, it fights me to the bitter end. Yes just one nut or bolt or wire connection or whatever.

Pics or it didn't happen.