Yes, you will need the relays and you definiitely need to get the OEM wire harness. I recommend the 7 pin and get a 7-4 pin converter. Makes life easier down the road.
Don't splice btw, you'll burn up some electronics.
Towing a little uhaul trailer
Hey guys,
So i'm moving some things about 30-40 miles or so and I was planning to haul a little 4' x 7' Utility Trailer from uhaul with around 300 lbs. of stuff inside.
Here's the catch
I don't have a hitch... :thatswck:
All I have installed is a tow ball in the rear bumper...
do you think it'd be ok to tow it that distance with just that? its not too much weight...
I also purchased one of these to plug into the trailer wiring thats preinstalled near the rear bumper:
![]()
after reading a couple posts (yes i searched) I'm guessing I need relays to use the exsisting wiring?
So i'm moving some things about 30-40 miles or so and I was planning to haul a little 4' x 7' Utility Trailer from uhaul with around 300 lbs. of stuff inside.
Here's the catch
I don't have a hitch... :thatswck:
All I have installed is a tow ball in the rear bumper...
do you think it'd be ok to tow it that distance with just that? its not too much weight...
I also purchased one of these to plug into the trailer wiring thats preinstalled near the rear bumper:
after reading a couple posts (yes i searched) I'm guessing I need relays to use the exsisting wiring?
1 - 1 of 11 Posts
1 - 1 of 11 Posts
