Nissan Frontier Forum banner

thinking about doing a SAS

1013 Views 7 Replies 6 Participants Last post by  roastbeef
i know this is a tremendous amount of work, and im ready for it, maybe. haha

but i would like a list of EVERYTHING

i want to run a D44 in the front, besides that, i know calmini makes a kit, but i know it doesnt come with absolutely everything

so would any one be kind enough to list EVERYTHING i need besides the d44 and the calmini kit

i have a 2002 frontier crew cab, it already has a 3 inch suspension lift from 4x4 parts (

thanks for the help guys!
1 - 1 of 8 Posts
I'm looking at a D44 also and running 39.5x13.50x20 Irok Radials. I'll let you know what the run down is on parts. I think i'm going coilovers in the front for now and then upgrade to coilovers in the rear down the road.

FYI if your planning on running that big of a tire on a 44 you'll need to run alloy shafts with a higher spline count or you will be blowing shafts up left and right. 37+ is Dana 60/ 1 ton territory
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.