[whodatitan808]

I was wondering if the 18" titan wheels with 265/70R tires would fit on a 00 frontier(dessert runner) your help is appreciated.

 

[JOHNNYXB9]

I believe the center hole in the titan rim is too small for the Frontier, but I may be wrong.

 

[whodatitan808]

by the way, i am in the process of selling my stock titan/wheels and tires and a buyer is inquiring about this

hmmm specs on the bolt pattern are the same for both

6 x 5.5


i am speculating the stock tires on the titan would be too big. pretty sure you could get a smaller tire to fit on the rim to work with the frontier. but it's up the buyer if he wants to do that.


any help/feedback is appreciated..thanks

 

[JOHNNYXB9]

Whodat: How big is the center hole in you Titan wheel?

 

[MEDEL514]

I did a goole search and found the Titan wheel size on another forum.

18X8 rim, 6x5.5 pattern, 139.7mm center bore, 25mm offset

So as long as your truck's rotor has a center ring smaller than 139.7mm, you'll be fine.

 

[PIMPaLiCiOuS]

I know there are a lot of Hardbody owners that are putting on both the 5 and 6 spoke Titan rims on their trucks. The hub of the Hardbody is bigger, so they just get the rim bored out until it fits properly. Check out nissanminis.com and you'll see a lot of them.

I swear, if someone really wants to put a pair of rims on their truck, they'll find a way. Its crazy!

 

[Kelly]

anyone know if it will fit on a 05 frontier?

i wanna add alittle bigger rim, but keep the oem styling.
i like my vehicle to be noticed only by the people that look hard enough to notice the small things

 

[njgsx96]

anyone know if it will fit on a 05 frontier?

i wanna add alittle bigger rim, but keep the oem styling.
i like my vehicle to be noticed only by the people that look hard enough to notice the small things

I'd like to see if anyone knows so bump for the question, with the Titan rims fit on a 05+ Frontier?

 

[Xterrable]

Hey all.. I know I am new here, but I used this site a lot when I swapped the wife's mazda6 wheels for winter with a Mitsubishi.

Says the Frontier (98-on) has a 6 lug x 137.9 patter . It does not list the current generation Frontier, but if anyone has put older Frontier wheels on the new style, then yes, they will fit....

Funny because the other post said that the Titan had a 137.9 center bore. 137.9 mm is a large hole for a center bore. Because 5.5 inches = 139.7 mm. so the other post , which stated that 139.7 is the center bore, that is wrong...

http://www.discountedwheelwarehouse.com/Vehicle_Bolt_Pattern_Reference.cfm

For the Nissan: http://www.discountedwheelwarehouse.com/Nissan___Vehicle_Bolt_Pattern_Reference.cfm

 

[BABYBUSA01]

so there is hope for the new gen 05 and up to have titan wheels thrown on? i hope your right! that was my original decision from the get go.

 

[06NissFront6-spSE]

so there is hope for the new gen 05 and up to have titan wheels thrown on? i hope your right! that was my original decision from the get go.

Iam hoping so, Iam looking at a set of 06 Armada 18's right now for my 06 Frontier, I believe they will work but the Armada Tire size is 265/70-18 = 32.6 inch and my Frontier is 265/75-16 = 31.6, so the Armada tires are 1 inch bigger, will they rub on my stock SE 4x4 or will they be OK, for under $600 I may find out soon, BUT I afraid of them rubbing my mud flaps or something else, Iam stumped.

 

[Xterrable]

I would guess not, but then again the new vehicles have the tires tucked pretty well. If you think about it, it is only 1/2 inch bigger on each side. So if you turn your wheels, just take a measurement at the tightest point. Cant say as much as under load though..