[bhays]

I have searched and searched, if this info is on the forum, I apologize.

Has anyone with this harness successfully connected a ASWC-1 (or PAC) and gotten the steering wheel controls working? If so, can you please tell me which wires to connect?

Everything everywhere says my 2010 w/ 6 disc takes a 70-7552 harness and that is wrong, it's a 70-7550. All of instructions on the Metro site are for the other harness. I sincerely appreciate any help at all! :nerd::crying::nerd:

 

[bhays]

I have isolated it to the upper left connector. But no idea which wires. Here are the options:

 

[txfiremedic]

Did you ever get this figured out? Im trying to do the same thing and having a hard time getting the ASWC to work.

 

[txfiremedic]

Bump

 

[inov8]

In the Post #2 harness image, the three steering wheel control wires are clustered together near the center.
Violet - Switch line A
Light green - Switch line B
Orange - Switch ground

 

[txfiremedic]

In the Post #2 harness image, the three steering wheel control wires are clustered together near the center.
Violet - Switch line A
Light green - Switch line B
Orange - Switch ground

I used these exact 3 wires and couldn't get it to work. When powered up the radio would turn the volume all the way down and change sources and turn screen off. I tried the programming several times and never could get it to work. Got frustrated and took it out. Any suggestions would be great!