Nissan Frontier Forum banner

Replacing sagging original leaf springs

1818 Views 4 Replies 4 Participants Last post by  Hertz
Should I go with genuine Nissan or aftermarket? My 2002 has the typical sagging springs, especially the passenger side.
1 - 1 of 5 Posts
Besides the springs and bushings, is there anything else I need to get?

I'm going to take the truck and parts to a local garage to install. I want to be sure they can do this without needing something and getting pi$$ed because I forgot something.
It’s possible you’ll need new hardware if they are unable to remove the stock ones in a manner that leaves them still usable. That would be bolts that go through the bushings to attach the leafs to the frame and u bolts to attach them to the axle.

Bushing bolts won’t be hard to get but leafs may be hard to find on short notice.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.