Nissan Frontier Forum banner
1 - 8 of 8 Posts

· Registered
Joined
·
30 Posts
Discussion Starter · #1 ·
Hi there, So I have a stock 2012 Pro 4X that I bought brand new a few years ago and I have a couple of questions for your more experienced members here. It is getting close to needing new tires as the stock tires are nearing the end of their life. I want something a little more "aggressive" looking than stock. Maybe a little wider? But will anything bigger rub? Stock looks pretty tight in there. And if I do go bigger do I need to lift the truck at all? Suggestions??????

Next question: I want to replace the stereo. Ever seen one with a backup camera? And will a new stereo fully integrate into the steering wheel controls? It would be nice to be able to still use them.
 

· Registered
Joined
·
171 Posts

· Premium Member
Joined
·
575 Posts
I want something a little more "aggressive" looking than stock. Maybe a little wider? But will anything bigger rub? Stock looks pretty tight in there. And if I do go bigger do I need to lift the truck at all? Suggestions??????

Next question: I want to replace the stereo. Ever seen one with a backup camera? And will a new stereo fully integrate into the steering wheel controls? It would be nice to be able to still use them.
1. Wheels - Depends on use, style, and how much willing to spend. I didn't want to affect the speedo so stayed with the stock diameter on 17" rims and BFG KO2 tires vs. our stock 4X 16's. Here's a wheel/tire/offset calculator to compare against stock. Several of our sponsors have wheel and tire options

2. Stereo - Crutchfield has just about everything you need that fits. Back up cams can be found fairly cheap on Am*zon. Again, depends on budget, what kind of sound you are looking for

Add some specifics to what you are after and folks can chime in - note opinions will vary. Good luck in your search.
 

· Registered
Joined
·
2,924 Posts
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top