Nissan Frontier Forum banner

Replace oil filter on 2010 Frontier SE V6 ?

8290 Views 24 Replies 11 Participants Last post by  RockHawk JHKU
So this is my first oil change on my new truck .I picked up some Castrol 5w30 & a K&N Oil filter. I removed the oil plug and drained oil ,then I searched for the oil filter ,and all I find is a polished aluminum capped thing with a strange end and a few screws and nuts on the end. Is this the filter ,and how do I remove it ? Thanks for any help!!
1 - 2 of 25 Posts
Wear a leather glove if you decide to do it through the access port...when it breaks loose those metal sides hurt. Did it once through that little hole and will never do it that way again.

Just saw a post yesterday where the guy (can't remember who and too lazy to search) had cut up his skid to make the access port larger and had fabbed up a new cover. I might be doing that eventually, for now, I just find its easier to remove all the screws and take the entire skid off. Plus, that makes it easier to use my strap filter wrench.
are you located in lawrence KS?
Nope, St Louis. Grew up in KC though as a lifelong Hawk fan.
1 - 2 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.