Nissan Frontier Forum banner

Rattling Door

2722 Views 15 Replies 7 Participants Last post by  Frijolero
Anyone have issues with a first gen door?

When im driving down the road and hit some bumps the drives door sounds like its loose from the frame. It doesn't move with the body so to speak.

Is this common for the 1st gens, anyone have ideas as to the cause?

Thank you for your time.
1 - 1 of 16 Posts
Check the striker pin that the door latch closes around. One of the rear doors on my 2nd Gen was terribly mis-aligned at the factory. The 2nd Gens need a Torx socket to adjust. Don't remove the Torx screws, just loosen them enough to adjust the striker.

As you close the door, you'll be able to see if you have things right.
1 - 1 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.