Prg lift kit, cant get coilovers to fit

2345 Views 10 Replies 7 Participants Last post by Shepherd40, Jun 14, 2016

Eman4354

Discussion Starter · Jun 14, 2016

I got the prg advanced extended coilover lift kit. The coilover is longer than stock shock, and i cant get it to fit. I get the 3 bolts up top in and aligned, but when i try for the bottom of the strut the hole is like 1/2 inch away from being aligned to put bolt through. Ive tried prying up with a bar but still cant get it up enough to stick bolt in. Any help would be greatly appreciated. Thanks

Save

1 - 2 of 11 Posts

nismo43

· #2 · Jun 14, 2016

How did you remove the stock coilover? Did you detach the upper control arm from the spindle? That allows the lower control arm to drop down more.

Save

nismo43

· #5 · Jun 14, 2016 (Edited)

Eman4354 said:
I tried but couldnt get the spindle to seperate any tricks there?

Try using a mallet to seperate them.

Edit: ^^ Just do what is wrintten above. Haha

Save

1 - 2 of 11 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month