Nissan Frontier Forum banner

Prg lift kit, cant get coilovers to fit

2318 Views 10 Replies 7 Participants Last post by  Shepherd40
I got the prg advanced extended coilover lift kit. The coilover is longer than stock shock, and i cant get it to fit. I get the 3 bolts up top in and aligned, but when i try for the bottom of the strut the hole is like 1/2 inch away from being aligned to put bolt through. Ive tried prying up with a bar but still cant get it up enough to stick bolt in. Any help would be greatly appreciated. Thanks
1 - 1 of 11 Posts
Doesn't the advanced kit come with UCAs? You'll need to get that bolt off to replace them - use anti-seize when you put them back together.
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.