Nissan Frontier Forum banner

Prg lift kit, cant get coilovers to fit

2336 Views 10 Replies 7 Participants Last post by  Shepherd40
I got the prg advanced extended coilover lift kit. The coilover is longer than stock shock, and i cant get it to fit. I get the 3 bolts up top in and aligned, but when i try for the bottom of the strut the hole is like 1/2 inch away from being aligned to put bolt through. Ive tried prying up with a bar but still cant get it up enough to stick bolt in. Any help would be greatly appreciated. Thanks
1 - 2 of 11 Posts
Sledgehammer to the front of the spindle is the safest way to separate it because it is the method least likely to cause damage or to have you end up with a spinning ball joint. You may need to whack it a few times.
dont be a girl about it
Hey now, some of us don't have a choice in the matter. :p
1 - 2 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.