Nissan Frontier Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter #1 (Edited)
Looking for a picture of the wiring harness for the stock window switch. My 07 XE has after market power windows and locks, uses frontier switches but not harness, wires are just pushed onto pins. I had the door panel off adjusting the lock, which wasn't opening all the way(fixed!). Anyways one of the wires came off the pin and I am not sure where it goes back. Its the red one, which I assume is power although there isn't voltage there when I test it.
If someone has a picture of what goes where that would be great or can walk me through the wiring diagram. I am not getting it and the wire that came off is red, which I assume is power so I don't want to be pluging it in random.

Here is what I am working with. Any help in the right direction would be appreciated. Thanks!

 

·
Super Moderator
Joined
·
3,191 Posts
The factory service manual would have the wiring diagrams, schematics and connector views. Try Nico Club's site; they have a lot of free, downloadable, Nissan service manuals at their site.
 

·
Registered
Joined
·
16 Posts
The factory service manual would have the wiring diagrams, schematics and connector views. Try Nico Club's site; they have a lot of free, downloadable, Nissan service manuals at their site.
These were removed from the Nico site in March 2018. ?

I'm also looking for the wiring diagrams for the 2012 Frontier power windows. I've got the OEM power windows and locks switches that I'd like to wire up to aftermarket locks and windows kits.

Just using the open circuit tone on my multimeter I'm able to find the door lock/unlock, the windows lock and passenger window up and down but I can't find the driver side window Auto down or the up and down.

The top left pin seems to be the common.
Bottom left pin one and two are both open by default but pin one closes the circuit when the lock button is pushed pin two closes when the unlock is pushed.
Top row pin 2 is closed and 3 is open by default. They toggle when passenger window down is pushed. They are both open when passenger window up is pulled.
Top row pens 4 and 5 are both closed by default and are both open when the lock Windows button is pushed down.

I can't make anything happen with the driver side window button.
 

Attachments

·
Registered
Joined
·
1 Posts
Looking for a picture of the wiring harness for the stock window switch. My 07 XE has after market power windows and locks, uses frontier switches but not harness, wires are just pushed onto pins. I had the door panel off adjusting the lock, which wasn't opening all the way(fixed!). Anyways one of the wires came off the pin and I am not sure where it goes back. Its the red one, which I assume is power although there isn't voltage there when I test it.
If someone has a picture of what goes where that would be great or can walk me through the wiring diagram. I am not getting it and the wire that came off is red, which I assume is power so I don't want to be pluging it in random.

Here is what I am working with. Any help in the right direction would be appreciated. Thanks!

same mmy problem, i need also a photo copy of it.
 
1 - 5 of 5 Posts
Top