[2whlfront]

Hey everyone. I've got a 2012 sl crew cab. I've leveled it with the bilstien 5100's, 265-70-18 Terra grapplers and a brand new set of Atx wheels!

She's 2wd but I've been able to make it where my 4whl buddies couldn't!

 

[Boomer32]

Welcome to CF and congrats on your new truck. Post up some pics when you get a chance.

 

[carid]

Hello and welcome on board! Sounds like you're doing great job on your truck, show it to us when you can. You'll find just about anything you might have questions about there. Have fun surfing around!

 

[raine]

Hey everyone. I've got a 2012 sl crew cab. I've leveled it with the bilstien 5100's, 265-70-18 Terra grapplers and a brand new set of Atx wheels!

She's 2wd but I've been able to make it where my 4whl buddies couldn't!

...but what are your 4whl buddies driving? LOL jk

Hello and welcome to the forums ::grin::

 

[2whlfront]

...but what are your 4whl buddies driving? LOL jk

Hello and welcome to the forums ::grin::

Lol. Well, Maybe could but wouldn't!

Sent from my SM-G930T using Tapatalk

Welcome to CF and congrats on your new truck. Post up some pics when you get a chance.

https://cloud.tapatalk.com/s/57ff270714848/IMG_20161011_205216.jpg?

I bought it new. Just now getting the chance to do some real mods, since the wife got her own new car.

 

[Nissan246]

Lol. Well, Maybe could but wouldn't!

Sent from my SM-G930T using Tapatalk


https://cloud.tapatalk.com/s/57ff270714848/IMG_20161011_205216.jpg?

I bought it new. Just now getting the chance to do some real mods, since the wife got her own new car.

Truck looks amazing. What offset are you running?

 

[2whlfront]

Truck looks amazing. What offset are you running?

0 offset. I had to cut some plastic and metal for them to fit, but not much. 265-70r18 tires

Sent from my SM-G930T using Tapatalk

 

[Nissan246]

0 offset. I had to cut some plastic and metal for them to fit, but not much. 265-70r18 tires

Sent from my SM-G930T using Tapatalk

Do you have any other photos? Really loving the look of your truck. Which ATX are these? I'd love to run the new AX202. Trying to find someone who has run them already.

 

[2whlfront]

Do you have any other photos? Really loving the look of your truck. Which ATX are these? I'd love to run the new AX202. Trying to find someone who has run them already.

Thanks! They're the AX201 18x9. In that size they aren't an "ideal fit" but if you have a body lift or even just smaller tires there should.be no issues. View attachment 228818

Do you have any other photos? Really loving the look of your truck. Which ATX are these? I'd love to run the new AX202. Trying to find someone who has run them already.

Sent from my SM-G930T using Tapatalk

 

[Nissan246]

Thanks! They're the AX201 18x9. In that size they aren't an "ideal fit" but if you have a body lift or even just smaller tires there should.be no issues. View attachment 228818 View attachment 228834



Sent from my SM-G930T using Tapatalk

I didn't even recognise they were the AX201's! Super Nice! Ok this just gave me the confidence to go ahead with these wheels. I'm thinking I will run 265 65 18s for tires. I don't mind some trimming, once its nothing major. I'll be sure to post some pics but I wont be pulling the trigger until May. It's my birthday and thats how I justify the cost to the wife .

Thanks so much 2whlfront

Btw I'm running a 2" lift up front and 1.5" in the rear. I'm running Bilstein 5100 HA and Rough Country shackles.

 

[2whlfront]

Nice. I justifies mine since the wife got a new car. Haha. Good luck I just looked at the 202 they are nice!

Sent from my SM-G930T using Tapatalk

 

[Nissan246]

0 offset. I had to cut some plastic and metal for them to fit, but not much. 265-70r18 tires

Sent from my SM-G930T using Tapatalk

I've been doing alot of research and keep coming back to these atx 0mm offset wheels. Could you snap a photo of what metal and plastic you had to cut. Also do you think running a 2" lift would eliminate the need to cut?

Thanks in advance!

 

[2whlfront]

With a 2" lift and that size tires I really don't think you'll need to do anything really. I'll snap a picture but I had to cut out a little of the wheel.well liner and roll a piece of the fender. It will make sense when I take the picture.

But it's worth it. The 0 offset makes a huge difference in the look. Also if you did a small body lift that would take care of it too.

Sent from my SM-G930T using Tapatalk

 

[Nissan246]

With a 2" lift and that size tires I really don't think you'll need to do anything really. I'll snap a picture but I had to cut out a little of the wheel.well liner and roll a piece of the fender. It will make sense when I take the picture.

But it's worth it. The 0 offset makes a huge difference in the look. Also if you did a small body lift that would take care of it too.

Sent from my SM-G930T using Tapatalk

Ok thanks so much. Yeah I really want the stance of the 0mm offset wheels. Now to decide on the tires. It never ends does it


Sent from my iPhone using Tapatalk

 

[2whlfront]

Ok thanks so much. Yeah I really want the stance of the 0mm offset wheels. Now to decide on the tires. It never ends does it


Sent from my iPhone using Tapatalk

No it doesn't haha. I'm going with Ridge grapplers from nitto next.

Sent from my SM-G930T using Tapatalk

 

[Nissan246]

No it doesn't haha. I'm going with Ridge grapplers from nitto next. View attachment 230233

Sent from my SM-G930T using Tapatalk

Thanks for the photo! Ok that's not so bad honestly. I live in Barbados so I have to consider shipping weight because I pay for shipping twice. Once to Miami and then another time when it gets here. I was looking at the Falken Wild Peak at3w based on weight and price. I do like the Nittos as well though.


Sent from my iPhone using Tapatalk