Nissan Frontier Forum banner

MPS Feeler: Titan Swap Custom Top Hats

11K views 62 replies 18 participants last post by  The other Sean 
When you visit the Metal yard, ask about pricing, ask about how they price depending on what length you buy. The place by me charges per cut, but if you buy the entire length they have (20' or 10') they will give you one free cut and many times, you end up with a full stick for what you would have paid for a shorter piece or, you spend an extra $5 and you get twice the material.
 
Having an install issue. So I'm a 2011 and my issue is with getting the top hat into the coil bucket. Just so everyone is aware, it does appear that my passenger was punched slightly smaller than my driver. I tried both complete shocks, and it is the bucket. So having to grind, sand or round-file it down.

Attempted greasing it a bit with no luck, won't budge.
I do remember one center hole having more play than the other on mine. While I built my own top hats off Glamisdude's, I also found drilling the 3 stud holes up to the next hole size also helped pop things in.
 
You have insufficient privileges to reply here.
Top