Nissan Frontier Forum banner

Map Light HomeLink Install

5K views 3 replies 3 participants last post by  splib 
#1 ·
Here are a couple of pics of the HomeLink install in the overhead console. Pretty easy once I figured out which wires went where. I had to trim some of the housing and the overhead console. Turned out really great. Programmed easy and works great.
 

Attachments

See less See more
3
#3 ·
I used a voltmeter to check which wire was the hot for the map light. Then tapped into it. Then tap the other wire to the ground. That way there is power to the home link even without the key on. It's a tight fit.
 
  • Like
Reactions: splib
#4 · (Edited)
aloha all cool beans. but dont they have a custom package for the trucks at Nissan prolly overpriced but just curious if they do? Also my 2019 has this piece w only 3 holes, this is a knockout space that "what exactly" is suppose to go there? a future garage door opener spot? aloha and mahalo
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top