Nissan Frontier Forum banner

Leaf Springs

3062 Views 9 Replies 9 Participants Last post by  nismo2001
Hey dudlers, my frontier's leaf springs are more flat then curved, just looking at it you can see the back end sags a little more then it should. I was just gunna get some bigger shackles to compensate for it, but down the road i eventually wanna pull a boat and wouldnt mind it being able to hold more of a load. Wondering what would be my best bet to just replace them or to aal?
1 - 1 of 10 Posts
Agree

I agree with Smiler. I just had a local shop (Keystone Spring / Suspension King add a leaf to the standard pack for me. Had them set the arch. for a 2" lift. Less than. $500 including u-bolts and everything. IMO the stock springs were not heavy enough to support the cc long bed in the first place. Do not add lift shackles to a worn out set of springs. This'll only make your problem worse7m
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top