Nissan Frontier Forum banner

Instrument cluster went crazy.

1530 Views 3 Replies 3 Participants Last post by  Bow
As I was driving to work everything was fine for about 30min, then I look down and all the needles in my display were not working and the odometer had no reading. The lights worked and no CEL. Then the needles jumped halfway and stayed stuck there. Restarting the vehicle didn't help.

I hope it is just a fuse but this truck has been a money pit so far. Looking for help to diagnose this today (at work now). Any ideas. TIA:comphead:
1 - 1 of 4 Posts
Check the Speed Sensor harness on the transmission to make sure it is not chaffing on the bellhousing.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top