Nissan Frontier Forum banner
1 - 3 of 3 Posts

·
Premium Member
Joined
·
1,173 Posts
Discussion Starter · #1 ·
I have a Kenwood amp that gives me the option of 50-200 Hz for the LPF. The HU is a JVC and it has the following seeing options:

LPF frequency 50 - 150Hz
LPF slope -24,-18,-12,-6 dB

HPF Frequency and slope are the same, with the option of turning frequency off.

The sub is the JL Stealthbox. The speaker is 22-200Hz, sensitivity 87dB.

The amp setting guide from Crutchfield say to use the HU or amp LPF but not both, but I don't have a choice, so I just need some guidance on settings so I don't screw anything up.
 

·
Premium Member
Joined
·
3,880 Posts
Open the low pass on the amp all the way up to 200Hz and use the settings on the HU.

A good starting point is about 80Hz at -18 slope
 

·
Premium Member
Joined
·
1,173 Posts
Discussion Starter · #3 ·
Okay, cool, I'll give that a shot in the morning! Amp stuff always confuses me for some reason.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top