Nissan Frontier Forum banner
1 - 1 of 16 Posts

· Registered
Joined
·
443 Posts
let me tell you how hard it is to find a tach cluster for a 98-99 4cyl fronty. And when you do find one its expensive!

Anywhoo.. the wiring is all there for the tach and everything.

You can see if your vss is working by testing it with a fluke. There are three sensors in the trans; park neutral switch, reverse switch, and vss. The vss is the biggest one iirc, read the fsm it will tell you how to test it.

I am having the same issue. I am going to try to swap the speed sensor first as that is the fault code its spitting out and that much easier to do. Where would one get a gauge cluster if needed?
ebay is your best bet.. if not car-part.com

Anyone know anything about swapping clusters with one that has a tach?
just pnp...

couple of things,
98-99 are different than 2000.
2000, and 2001 are compatible with eachother.

if you have a 98, 99, you can swap in a 00-01 cluster however you'll need splice it in.
 
1 - 1 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top