Nissan Frontier Forum banner

FS5W71C Manual transmission rebuild.

19027 Views 5 Replies 5 Participants Last post by  jjsnulife62
Thought I would post some photos of the rebuild I did on my 5speed manual transmission. This is the first mechanical project I have ever tackled. It was intimidating considering the most complicated thing I had done up to this point was replacing the shocks and carrier bearing in my truck. With 800 bucks for tools and parts (I didn't even own a ratchet or socket set) and following the service manual to the letter I managed to take that howeling chunk of aluminium and steel, disassemble, clean and replace all the bearings,sycro rings and reassemble it.
Here is the link to all the rebuild photos


See less See more
  • Like
Reactions: 2
1 - 1 of 6 Posts
Quite a project! What kind of press did you use? When will the trans go back in the truck?
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.