Nissan Frontier Forum banner
1 - 20 of 204 Posts

·
Registered
Joined
·
1,428 Posts
Discussion Starter · #1 · (Edited)
Here is a spot to post all of your Sound and Video clips of different exhausts.

Please try to List

1. Brand and/or model number and description of exhaust setup.
2. Engine in your vehicle. (2.4, 2.5, 3.0, 3.3, 3.5, 4.0, etc.)
3. Description of Vehicle (Year, trim package)
4. Cost estimate
5. Link to clip


Also: Please keep comments about others exhausts to a minimum to make this thread easier to search.



I'll Start here:
1. Factory muffler with mandrel bends straight out the back with dual tip.
2. KA24DE
3. 1999 Frontier XE 2wd Auto
4. $45 Shop used some scrap bends they had and I bought a dual tip!
5. http://media.putfile.com/Nissan-Frontier-24-Factory-Muffler-w-Mandrel-Bent-Pipes-Dual-Tip
http://media.putfile.com/You-Can-Really-Hear-the-CAI-Scream
 

·
Registered
Joined
·
1,601 Posts
1. Flowmaster 50 series SUV, dual 2.25" in, dual 2.25" out. 2.25" piping exiting both pipes in stock location.
2. 4.0L VQ40
3. 2005 Frontier KC Nismo 4x4 AT
4. $345 installed

http://youtube.com/watch?v=Ictgh58H0xg

p.s. the sound clip is with the muffler at approxiamtely 3 hours old, I'll post another in a couple months if the sound changes any.

here are some pics too:
 

Attachments

·
Registered
Joined
·
41 Posts

Attachments

  • Like
Reactions: GraviTitan

·
Registered
Joined
·
4,593 Posts
Just noticed the sticky. Ill post up what ive done, maybe it can help some people out or what not. Its a Cat-Back design 2.5" off each cat, running into a flowmaster 2.5" to 3" Y-pipe. Then the muffler right after the Y-pipe and a piece of 3" tube bent at a 90* ( :( compression bend)angle and turned slightly down so it exits just before my pass rear wheel. Sounds amazing for this motor if you ask me.




and for sound

 

·
Premium Member
Joined
·
1,379 Posts
Okay got my exaust setup done

Mufflar: Magnaflow 2 1/4 in/out w/ turndown

2: 2.4l I4

3 2004 Frontier XE w/ power package

4. http://www.youtube.com/watch?v=d2LliV2o1_s


I love it, its not too loud, not to quite,but im sure it will get louder as it gets older. not the best clip, but im sure it will be okay.
 

·
Registered
Joined
·
46 Posts
i thought i would try to get some better vids of my exhaust sound so i did some more clips and tried editing them together. it was my first attempt at editing but i think its ok. i wish i had some one to help me with the drive by part but it was the best i could do by my self. hope you enjoy and let me know what you think.



http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=2022557565
 

·
Registered
Joined
·
2,167 Posts
Gibson Stainless Steel part #612211 3" pipe, 3.5" SS tip


Image uploading. Refresh page to view






 

·
Registered
Joined
·
1,130 Posts
Bassani clips here. My truck is an 05 Nismo V6. Cost for the stainless system was $525 shipped with a group buy discount. The system is a single in single out. The tip actually has a resonator in it too and the system re-uses the stock vibration damper. Build quality is very high.

Picture of the tip is on Badbrad238's truck. He has the same system and we did our install together.



Stock clip:
http://video.google.com/videoplay?docid=5187457959702582869http://video.google.com/videoplay?do...57959702582869

Bassani clip:
http://video.google.com/videoplay?do...09704690828947
 

Attachments

·
Premium Member
Joined
·
4,070 Posts
1. Bassani Aft-Cat Exhaust System Part# 400515 (Stainless Steel)
2. 4.0L V6
3. 2005 King Cab Nismo 6 Speed
4. $525 for system, $14 for 4 new flange nuts (could only get them from dealer), $8 for a bottle of anti-seize goop
5.
Enjoy these clips (I still have to get exterior drive by's)


Cats Only:
http://www.youtube.com/watch?v=plBw4C6PukI

Stock Exhaust:
http://www.youtube.com/watch?v=6dAr1nS-gOg

Bassani After Install:
http://www.youtube.com/watch?v=NZLCfFt_uuo

Bassani Interior Start Up:
http://www.youtube.com/watch?v=9MlcdOPXKTI

Bassani Interior Take Off's:
http://www.youtube.com/watch?v=JITsJFoiBAg

 

·
Registered
Joined
·
17,538 Posts

·
Registered
Joined
·
1,059 Posts
HKYStormFront said:
true dual setup using Flowmaster 50 Series SUV dual-in/dual-out muffler

click the link for pics and info: http://www.clubfrontier.org/forums/showthread.php?t=12981

here's a teaser:


more to come soon!
I'm impressed with the 3rd gear rubber. I can barely get rubber in 1st gear anymore now that I have the 18's with the Falkens. They are sticky as all get out. Sorry for the thread jack but to get it back on track your exhaust sounds killer.
 

·
Registered
Joined
·
444 Posts
Flowmaster 50 Series, Single In, Dual Out at 45 degree angle
V6 3.3L
2004 Nissan Frontier XE CC L/B 2wd Auto
$250 installed


Heres a clip of my exhaust, its sh1tty right now, will get a better one.

And thats my boxer in the background, he hates it. lol.

http://www.youtube.com/watch?v=Pm97JxNYTAE
 

·
Registered
Joined
·
2,167 Posts
Did a new video today, 4 months after install

 
1 - 20 of 204 Posts
Top