Nissan Frontier Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter · #1 · (Edited)
Good day all,
I’m a new to me 2018 Frontier Pro4X owner and I really enjoy this rig, I looked at the Readylift kit and it is nice but i didn't like that rear only came with a 2 inch longer shackle, giving only a inch of lift, I have read that it will make the front end higher than the rear on the Pro4X, which I didn't want. So I went with the Daystar kit and I also installed some cam bolts from Moog at the same time. So I figured I would post what I found with this kit:
Before lift:
LF 20 1/4 from center rim to fender lip
RF 20 1/4 from center rim to fender lip
LR 20 7/8 from center rim to fender lip
RR 20 7/8 from center rim to fender lip
After lift:
LF 22 3/8 from center rim to fender lip
RF 22 3/8 from center rim to fender lip
LR 22 3/8 from center rim to fender lip
RR 22 3/8 from center rim to fender lip
I have taken pictures of the components included in this kit, I really wanted to try a kit from PRG but trying to get across the boarder is a little nuts right now, also i didn't want to wait weeks or months for it.
I really hope this helps someone else like myself that is looking for info on this kit
Cheers
Travis
318949
318952
318953
318954
318955
318956
318957
318958
318961
318960
 

·
Registered
2018 Frontier Pro-4x
Joined
·
4 Posts
Great post!
Any issues with coil bucket contact?
And was it the kn09105bk kit?

I've got a 2018 pro 4-x and I've been looking around at different options. Still unsure of which route I want to go though.

Cheers!
 

·
Registered
Joined
·
17 Posts
Discussion Starter · #3 ·
I have been some contact, need to do the bump stop mod and yes it is the KN09105BK kit. I am really happy with it so far, it’s going to in until I can either go with a full OME kit after I get bumpers or something similar
 

·
Registered
2018 Frontier Pro-4x
Joined
·
4 Posts
Jeeze the kit number is in the title, how did I miss that?
Anyhow good to hear you're happy with it.
 

·
Registered
Joined
·
2 Posts
Good day all,
I’m a new to me 2018 Frontier Pro4X owner and I really enjoy this rig, I looked at the Readylift kit and it is nice but i didn't like that rear only came with a 2 inch longer shackle, giving only a inch of lift, I have read that it will make the front end higher than the rear on the Pro4X, which I didn't want. So I went with the Daystar kit and I also installed some cam bolts from Moog at the same time. So I figured I would post what I found with this kit:
Before lift:
LF 20 1/4 from center rim to fender lip
RF 20 1/4 from center rim to fender lip
LR 20 7/8 from center rim to fender lip
RR 20 7/8 from center rim to fender lip
After lift:
LF 22 3/8 from center rim to fender lip
RF 22 3/8 from center rim to fender lip
LR 22 3/8 from center rim to fender lip
RR 22 3/8 from center rim to fender lip
I have taken pictures of the components included in this kit, I really wanted to try a kit from PRG but trying to get across the boarder is a little nuts right now, also i didn't want to wait weeks or months for it.
I really hope this helps someone else like myself that is looking for info on this kit
Cheers
Travis View attachment 318949 View attachment 318952 View attachment 318953 View attachment 318954 View attachment 318955 View attachment 318956 View attachment 318957 View attachment 318958 View attachment 318961 View attachment 318960
I have a question. It says it only fits 2008-2013 models but you said it fit your 2018 pro 4x just fine? Just making sure.
 
1 - 5 of 5 Posts
Top