Nissan Frontier Forum banner

CC LE lift measurements

1013 Views 5 Replies 3 Participants Last post by  LoopOut
Hey peeps. Just wondering if any CC LE owners, with Radflo 2.0's and 285/70/17's could tell me what their measurements are from ground to top of wheel arch?
Reason for asking is I have ordered some Radflo ext. 2.0's and aal's. NO UCA's just yet (lack of funds). Was told by Greg at PRG to just put a piece of rubber hose on UCA for now. ANYHOW... I was curious to know how high my truck would/could actually sit. I know I could just add 2"-2.5" to whatever I measure, but I think my stock suspension is pretty sagged out. So here is my thinking. If the advertised 2-2.5" lift with coilovers is based on the height achievable from a truck with "newer" suspension..... would that mean when I get the coilovers on my sagged out 06 CC LE, I could potentially see more than 2-2.5"????:) I think it makes sense... but I have been very wrong before so...
Anybody with CC LE's that wanna show an anxious guy some numbers would be pure hero. If im wrong in my sagged out suspension theory, please feel free to correct and educate me please.

My 06 CC LE is currently: Front = 33.75" , Back = 34.25" ground to highest point of wheel arch. With stock 265/65/17's.

Thanks
1 - 2 of 6 Posts
there are so many factors here that can give you different answers - including my rear suspension that is sacked a bit. after Radflos, 285 bfgs and a 2" BL, i believe my fenders were sitting at 39". I'd have to look to see where that is now.
just went and checked. 39.5" in the front, 38.75" in the rear. my Rad's aren't cranked that high in the front, either.
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top