Nissan Frontier Forum banner
1 - 3 of 3 Posts

·
Registered
2001 Frontier 3.3L KC 4X4 MT
Joined
·
36 Posts
Discussion Starter · #1 ·
Trying to replace wheel bearings and ball joints on 2001 SE 4wd and I can't remove the hubs. I have manual warn hubs, I removed the 6 6 ml hex bolts and the hubs will move maybe a 1/4" away from the hub assembly but something is keeping them from coming all the way off. Hubs are in free mode and I can spin them freely, both hubs have the same issue. I tried moderate prying with screw drivers but figured I must be missing something like a c-clip. Any ideas?
 

·
Registered
Joined
·
50 Posts
Pictures will help to give better advise
 
1 - 3 of 3 Posts
Top