Nissan Frontier Forum banner

Status
Not open for further replies.
1 - 20 of 22 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter #1 (Edited)
(Splitting Up) BNIB Radflo Extended Travel Ultimate Kit + Extras

***UPDATE***

Ok, I'm going to split everything up to move it along quicker. Here are the items and prices below. These include shipping in the lower 48. If it is outside the lower 48, may add a little to the price. These prices should be lower than you can find from anywhere else shipped to you based on what I looked at today. If you can find the same item cheaper shipped to you, I will match it.

I will still sell the entire kit for $1,500 shipped if anyone is interested.

Still Available Items
- PRG/Deaver rear 1.5” lift Add-A-Leaf w/ hardware - $85
- New 7.5" zinc plated rear Ubolts w/hardware - $40

SOLD Items
- 2.0 Degree Rear axle degree shims for proper pinion angle correction - $40
- Bilstein 5125 series nitrogen charged rear shocks - $175
- Cam Bolts - $50
- PRG Delrin LCA Spacers - $25
- SPC upper control arms - $485
- Radflo 2.0 extended travel adjustable coil overs- Fully adjustable from 0-2.5” of lift. (600# springs and spanner wrench included.) - $810
 

Attachments

·
Registered
Joined
·
397 Posts
...if its all still BNIB, too bad you can't return it to the vendor?
 

·
Registered
Joined
·
37 Posts
Discussion Starter #3
I could return them, but then I would be responsible for return shipping costs plus losing a 20% restocking fee.

Instead of doing that, seeing if someone is looking for the same package and pretty much gets cam bolts/Delrin spacers for free. And then also very quick (same day) shipping.
 

·
Registered
Joined
·
397 Posts
Ouch, that's a steep restocking fee (I try to avoid vendors that charge restocking fees at all times)...good luck with your sale!
 

·
Registered
Joined
·
37 Posts
Discussion Starter #6
I have someone interested in the rear components if anyone is interested in just the Radflo's and SPC UCAs.
 

·
Registered
Joined
·
158 Posts
Are you looking to separate? I'd be interested in the cam bolts.
 

·
Registered
Joined
·
37 Posts
Discussion Starter #14
PM's replied to. Not looking to split up at this time unless except for possibly selling the front and rear components separately.

Added a few pictures of the items as they sit now, still in the original shipping boxes.
 

·
Registered
Joined
·
538 Posts
Are those Radflos 2.0 or 2.5?
 

·
Registered
Joined
·
37 Posts
Discussion Starter #17 (Edited)
Ok, I'm going to split everything up to move it along quicker. Here are the items and prices below. These include shipping in the lower 48. If it is outside the lower 48, may add a little to the price. These prices should be lower than you can find from anywhere else shipped to you based on what I looked at today. If you can find the same item cheaper shipped to you, I will match it.

I will still sell the entire kit for $1,500 shipped if anyone is interested.

Still Available Items
- PRG/Deaver rear 1.5” lift Add-A-Leaf w/ hardware - $85
- New 7.5" zinc plated rear Ubolts w/hardware - $40

SOLD Items
- 2.0 Degree Rear axle degree shims for proper pinion angle correction - $40
- Bilstein 5125 series nitrogen charged rear shocks - $175
- Cam Bolts - $50
- PRG Delrin LCA Spacers - $25
- SPC upper control arms - $485
- Radflo 2.0 extended travel adjustable coil overs- Fully adjustable from 0-2.5” of lift. (600# springs and spanner wrench included.) - $810
 

·
Registered
Joined
·
1,148 Posts
Who makes the Cam bolts? Do they have the washers on each side? I am interested.
 

·
Registered
Joined
·
37 Posts
Discussion Starter #19
Cam bolts were Nisstec, but they have already been sold.
 
1 - 20 of 22 Posts
Status
Not open for further replies.
Top