Nissan Frontier Forum banner
1 - 6 of 6 Posts

· Premium Member
Joined
·
724 Posts
Discussion Starter · #1 ·
So been busy the last two weeks. Titan swapped the front, PRG uppers and still waiting on the half shafts so im rocking a prerunner right now. Herculined the sides quarter panel down. Got pics of the herculiner if i can get them off of my phone. I got blocks and titan u-bolts for the rear but the brake lines were too short, we were trying to put the blocks on and the axle was hanging on the brake lines. Puting on the brake lines this week and will put on the blocks probably fri or sat, should only take an hour with the hardest thing being drilling out the spring plate for the bigger u-bolts. Ill put the picks up when its finished. It looks pretty gnarly with the 4 inches in the front and 2 in the back right now. Half-shaft should be done on the 15 and here before the 20th.
 

· Premium Member
Joined
·
724 Posts
Discussion Starter · #4 ·
This is after sanding it down, to the metal on some parts.


This is after the second coat. Ive got more pics but ive been busy moving into a new place. I should have them up tonite.
 

· Premium Member
Joined
·
1,883 Posts
Sick dude! Nice work. More pics!
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top