[Wildland_Warrior]

A bed rack for my '14 4x4 ccsb SV, Me and the neighbor been workin on between beers.

 

[Wildland_Warrior]

Almost there, just gotta lay on the clear coats

 

[Wildland_Warrior]

"my neighbor and I" - Im more important than my neighbor, so in this context I come first. Haha

Pipe is 1.75" OD, so that nug is at least 1.5" by 1.5", my guess it was a 2.5 gram nug if not 3.

 

[Wildland_Warrior]

Looks great!
Glad to see someone doing tube work. Not as easy as it looks.
May I ask what bender you used?
Material?

Bender is the neighbors from harbor freight. We used 1.75" cheap round tubing, cost me 75$ for metal.

 

[Wildland_Warrior]

What is that yellow stuff in the left picture?


Sent from my iPhone 7 plus using Tapatalk Pro

right picture?, weed contra, its weed.

 

[Wildland_Warrior]

Bender is the neighbors from harbor freight. We used 1.75" cheap round tubing, cost me 75$ for metal.

Well it seemed to work well.
What wall thickness tubing?

11 gauge

 

[Wildland_Warrior]

Installed, waiting for rotopax mounts and cans.

 

[Wildland_Warrior]

Did you use a notcher or the old chop saw,4 1/2 grinder?

Notcher.

 

[Wildland_Warrior]

I have a JD2 Notchmaster. Only thing I don't like about it, is you cannot cut shallow angles.
I have to use my mill a lot for those situation. Are you using the HF notcher?
Do you use a bending program like "BendTech"? I use "SolidWorks to get the actual measurements then go to my BendTech program. Lot faster than the doing all the calculations.
Sorry about all the questions but not many people here do any bending.

The bender, I like the idea of using that program for your measurements, we just did the calculations, took some time for discussion and double checking haha before we did the bends.
https://www.google.com/url?sa=t&sou.../tubing-benders/&ved=0ahUKEwioi72wxM3WAhVBRGM
KHViHArYQFggqMAE&usg=AOvVaw0CJcYMbO0eo_punXJj_nyo
notcher was simillar to this one, hole saw, worked good till the hole saw got dull then they needed some help with a grinder. http://www.eastwood.com/pipe-notche...MIy8KKrcXN1gIVlGB-Ch37lwj5EAQYBiABEgKi0_D_BwE