[Arthur_C]

So i have decided to start a build thread for my truck even though i am not doing anything extreme to it, but mainly to help gives others an idea of what i have done and remind me as well as what i have done to it.

Some info on the truck
year: 2015
Model: Frontier
Trim: Pro-4x
Package: Luxury
Color: Super Black

Interior Mods:
Valentine one Hard wired
Interior LED lighting kit
WeatherTech all weather floor matts
Limo Window Tint

Exterior:
Full LED conversion kit for headlights
Trailer Hitch w/ Monster Hook
Carbon Fiber shorty Antenna
Rigid D2 Dually Wides & Driving Aux Lights
Rigid Grill with 10 Inch Hyperspot
Rigid SAE fog lights



Suspension:
RC 6 Inch Drop Bracket Lift
Radflo 2.5 inch extend Travel Coilovers (600lbs spring)
SPC upper control arm
Fabtech stealth Rear shocks
4 Inch block.
AAL springs.
Radflo 2.0 Coil overs with eibach 600ls springs + 1/2 inch top plate (Previous)
Bilstein 5125 (Previous)
Rubicon 2.5"leaf retainer clips
Bilstein 5100 series all around (set at 2") (Previous)
PRG AAL 1.5" (Previous)

Wheels and Tires:

KMC Heist 18x9 +30mm
Bora 2 inch hub centric spacers.
Nitto Terra Grappler G2 265/70R18 (Previous)
Nitto Ridge Grappler 285/75/18

Performance:
AEM Cold air intake
Magnaflow Y Pipe

Next on the list:

Stillen Supercharger kit
Dual Exhaust + Headers
Hefty Fab Bumper

 

[FrontierExplorer]

Sounds like a good start. Look forward to seeing pics!!

 

[Arthur_C]

Sounds like a good start. Look forward to seeing pics!!

Thanks, have the wheels and tires on order and should have it done next week. Cant wait!!

 

[Arthur_C]

Got the truck all cleaned today, took the front mud flaps off and the air dam out too. Tomorrow she gets the make over she has been waiting for.

Truck looks much better without them, but she probably will get a lot dirtier now...

 

[Paulny61]

Exciting can't wait to see!

 

[Arthur_C]

Finally got it all done today and i could not be any happier. I have to thank all the forum members who helped me out with questions, PRG for the Parts and Extreme out in katy Tx for the great work.

Truck Drives great on the 18x9 wheels with Nitto G2 and absolutely no rubbing at all. Only have to order new tie rods as we found out a Nissan tech's which did the alignemnt fu*ked it up and i need to adjust my front tow.

here are some pics.

 

[kfults]

Looks good! I really like the graphics too, it really makes it stand out.

 

[Arthur_C]

Looks good! I really like the graphics too, it really makes it stand out.

Thanks, it really does! It stands out but looks clean.

 

[Texasims]

Clean truck!!
I may be missing something, but how is it you're getting away without a front license plate in Texas?

 

[Arthur_C]

Clean truck!!
I may be missing something, but how is it you're getting away without a front license plate in Texas?

Thanks!Not sure, it is a secondary offence so i believe they can not stop you only for that. Have not had one since i got the truck a year ago. Cops down here do not seem to care i guess..

 

[AZ12FR]

Did yours come new with the rear sliding window?

 

[Arthur_C]

Did yours come new with the rear sliding window?

yes it did, I think it was part of the luxury package. your's didn't?

 

[ace028]

Arthur,

Glad to see you finally got around to working on your truck. It looks fantastic!!! That black looks outstanding! Whats next on the list?

 

[Zackmo47]

How do you like the ride of the lift kit. I was thinking about 5100s at 2" up front and then the 1.5" AAL in back. Or the 2" 2 leaf reaver pack from off in the rear.

 

[Nethevia]

Your truck looks good. I kind of wish I had the rocker logo

 

[Arthur_C]

Arthur,

Glad to see you finally got around to working on your truck. It looks fantastic!!! That black looks outstanding! Whats next on the list?

It was going to be the hefty bumper but i probably will do the supercharger next. that will be the next big mod but i may end up doing the projector retrofits as i am running HID's right now before the supercharger.

How do you like the ride of the lift kit. I was thinking about 5100s at 2" up front and then the 1.5" AAL in back. Or the 2" 2 leaf reaver pack from off in the rear.

I love the ride, the truck rides like a sports car now. I think it actually rides better now to be honest. The only time you really notice stiffness is when you hit a big hole or dip and the front end just comes down hard enough for you to notice it. other than that it is great all around.My 5100's are at 2 and i have a 1.5"AAL in the rear and they are settling in a feels slightly softer now.

I think it is a great setup and the best part is that it maintains factory warranty and no CB contact. Truck sits levelled too!

 

[Arthur_C]

Your truck looks good. I kind of wish I had the rocker logo

Thanks, not as modded as yours but after seeing your thread i may have to do the Bullydog and I am also debating on the roof mounted light bar. is it noisy?

 

[disguy]

what to sell your stock wheels?

 

[Arthur_C]

what to sell your stock wheels?

Wheels have been sold, missed out on it.

 

[Arthur_C]

Was messing with the idea of mounting a tire in the bed this week before i offloaded the stock wheels. I like the look, may have to move the spare up top. this was what i got so far.