added hydro assist

4507 Views 7 Replies 6 Participants Last post by spida, Dec 14, 2020

penski61

Discussion Starter · Apr 29, 2010 (Edited)

decided to go ahead and put hydro assist on the truck because some times when out wheeling the steering wheel is a workout to turn

i need to go to lowes and find another piece of strap to hold up the PS cooler , the one piece was what i had laying around lol
those zip tie things that come with the cooler are a joke

drilled and tapped the box

i ended up moving the resevoir right over the pump because i didnt want to buy a 45* or 90 * and cut down on the flow goin to the pump

this hose i was able to spin so its tucked behind the fender

one of the best mods ive done since the SAS , make the wheeling much more enjoyable

and a pic testing it out

See less See more

Save

Reactions: 1

1 - 3 of 8 Posts

penski61

Discussion Starter · #4 · Apr 29, 2010

with the waggy 44 the nissan box is just enough to where the stops on the knuckles dont hit the c's , which works out perfect

i just went with the trail gear ram with hoses and brackets , and new resevoir because i got a really good deal on it
the steering box i got from napa about 3 months ago so everything was new on it
the pump i got built to hi-flow from a local shop here in az
i did look at PSC although the route above was much cheaper