Nissan Frontier Forum banner
1 - 5 of 5 Posts

52 Posts
Discussion Starter · #1 ·
After years of research, development, and testing I am happy to introduce a suspension truly ready to hit the dirt.

I want to start by first clarifying which trucks this will fit on. Currently this kit is designed to work with 98-04 2WD 4 Cylinder Frontiers and all 86-97 D21 Hardbody 2WD 4 cylinder or V6.
Sorry V6 Frontier guys :frown:


-Wheel travel: 14.5-16"
-1" Uniball Spherical bearings for maximum toughness
-Dual shock tabs allow for both a 2.5" coilover and a triple bypass shock
-Laser cut boxed lower control arms
-Tubular upper control arms with 7/8" heim joints
-Super beefy steering system using 3/4" heim joints
-Converts wimpy nissan spindles/hubs/brakes to massive Toyota spindles/hubs/brakes
-Custom Toyota Lift Spindle lifts the front 5-6" over stock
-Front track width increase: 8-10"

This kit is not for the faint of heart, it will require significant fabrication work. Custom shock mounts, lower subframe, and upper control arm pivot (tool provided) fabrication is required.. The kits themselves will be tacked together but it will be up to a competent welder to finish them off.

If anyone is interested or knows someone that might be, feel free to PM me for details/pricing. ::grin::

Super Moderator
3,850 Posts
1 - 5 of 5 Posts