[starion4g64t]

Hey guys,
I'd imagine some of you guys have 3d printers and I am curious what truck parts you've made. Even if you don't have a printer, ideas are always welcome. I've done more on other vehicles, but on my frontier I've only designed and printed a USB replacement for the 3.5mm jack, and a bullydog mount for the head liner. I'll probably print a rocker switch panel to go in place of the stock Bluetooth speaker at some point, bit am always looking for ideas.

 

[mycbtech]

Ive done some with my older Pathfinder, I printed a fuse panel setup for my winch and secondary battery. Used PETG and it has held up fairly well other than a little bit of warping but not enough to warrant any more supports.

Also @starion4g64t I wanted to try to reach you about your for sale post but i have to wait another week to be able to respond to your post. Can you send me a DM please?

 

[Belvedere]

For this truck I've only done a phone stand for the pocket above the center stack and a mount for my brake controller. Next on the list is to print a switch blank that I can insert (assuming I can get it apart) the smaller portion of the switch from my heated mirrors timer.

 

[mycbtech]

For this truck I've only done a phone stand for the pocket above the center stack and a mount for my brake controller. Next on the list is to print a switch blank that I can insert (assuming I can get it apart) the smaller portion of the switch from my heated mirrors timer.

why not make it into something that could be useful, like another USB power point?

 

[Belvedere]

My 19 already has a USB power point, and a heated mirror switch will be useful for me... 😁

 

[legacy_etu]

Has anyone seen the t slot that the Ford Maverick provides for the end user to 3d print stuff and attach? Pretty clever idea on their part.

 

[Zedbra]

Those machines are pretty darn cool for what they can do.

 

[mxtreme30]

Anybody try to print a cup holder insert that looks oem but holds something bigger than a 12oz can and doesn't stick to everything that you put in it? One that would hold a large tumbler somewhat snug but stay put when you take a drink would be awesome! If I take my inserts out then holes are way too big and the inserts don't let my tumbler sit all the way down and wedge onto bottom of tumbler. I've seen quite a few posts with same problems and aftermarket is non existent. Maybe a group buy if a prototype is made...
My tumbler measures 3" at the base and measures around 3.5" at widest part that sits in cup holder.
Just an idea that might be pretty popular.

 

[raine]

I'll probably print a rocker switch panel to go in place of the stock Bluetooth speaker at some point, bit am always looking for ideas.

I remember someone used to sell one a while ago on one of the 3D forums but they disappeared... this might be a good idea still. That or a faceplate panel that fits turns the sunglasses holder into a switch pod, maybe

Random comment: Widebody Starion ESI-R/Conquest TSI's were awesome back in the day

 

[jbrennan26]

RCI Rack Bracket Project

I'm getting started on what I hope will be a pretty straight forward process from here on out, so I figured I'd make a short project build thread to document. For many months I've scoured over the various bed rack and tonneau cover options in search of a setup that suits my needs. Those needs...

www.clubfrontier.org

I made these rack mounts awhile back, albeit on a big SLS printer with PA12. I'm in the market for an at-home printer though, maybe an Ender Pro to start. I always thought some divider type part that drops into the center console armrest could be useful for storage organization.

 

[herotrooper]

Kind of reviving this, but @starion4g64t would you share that stl for the BullyDog mount?

 

[ssundet]

Anybody try to print a cup holder insert that looks oem but holds something bigger than a 12oz can and doesn't stick to everything that you put in it? One that would hold a large tumbler somewhat snug but stay put when you take a drink would be awesome! If I take my inserts out then holes are way too big and the inserts don't let my tumbler sit all the way down and wedge onto bottom of tumbler. I've seen quite a few posts with same problems and aftermarket is non existent. Maybe a group buy if a prototype is made...
My tumbler measures 3" at the base and measures around 3.5" at widest part that sits in cup holder.
Just an idea that might be pretty popular.

This is probably a great idea, I feel that pain, lol, just a less sticky slightly larger rubber textured insert would be nice for my metal quart sized cups.

 

[Floating_Bus]

Hey guys,
I'd imagine some of you guys have 3d printers and I am curious what truck parts you've made. Even if you don't have a printer, ideas are always welcome. I've done more on other vehicles, but on my frontier I've only designed and printed a USB replacement for the 3.5mm jack, and a bullydog mount for the head liner. I'll probably print a rocker switch panel to go in place of the stock Bluetooth speaker at some point, bit am always looking for ideas. View attachment 341219
View attachment 341218

well, I just joined this forum to ask a question. I’ve just purchased a 2022 frontier. I had a Nissan Leaf. Bothhave a problem with viewing the screen when the sun is at aparticular angle.
Has anyone considered 3d printing a good looking visor that might help this situation?

thanks!

 

[herotrooper]

well, I just joined this forum to ask a question. I’ve just purchased a 2022 frontier. I had a Nissan Leaf. Bothhave a problem with viewing the screen when the sun is at aparticular angle.
Has anyone considered 3d printing a good looking visor that might help this situation?

thanks!

I know there are some Mazda drivers who made a visor for the screen. Could see if it’s similar

 

[Zedbra]

Welcome to the Club.

 

[DeadGnome]

Wish - Shopping Made Fun

Shopping Made Fun. Join over 500 million others that have made their shopping more smart, fun, and rewarding.

dl.wish.com

I've considered this item from wish. It'll probably take 4 months to get in. 😅