Joined
·
173 Posts
I am parting out my truck because I'm going to get rid of it. I have most of the parts off so far. Here are some pics of my truck and what I have off of it for sale.
http://www.clubfrontier.org/forums/...6-album692-whoredout06-album-picture27593.jpg
Afe twisted steel shorty headers-stainless steel only had them on my truck for about a month. $500 shipped.SOLD
Prg 2 leaf add a leaf 2'' lift. $75 shipped.SOLD
Biokustoms 2'' drop spindles-these give you 2'' drop bolt right on and keep alignment in spec-they are stock spindles that have been modified for a 2'' drop. $500 shipped.SOLD
Qa1 custom length coilovers-these are the coilovers I had in conjunction with the drop spindles to get 3'' of drop in the front of my truck. The coilovers by themselves will give you about an inch or so of drop. The upper mounts bolt right into the coil bucket. I can sell these separately or with the drop spindles. $300 shipped.SOLD
Prg motor mounts 75 shipped.SOLD
AP racing big brake kit front-13'' rotor, 4 piston, this kit will fit 18'' or larger wheels, not sure a bout 17'' wheels. I used a 1/4'' wheel spacer to make my wheels clear the caliper. The rotors are slotted and drilled and the pads have plenty of wear left on them. This is the big brake made for the frontier. I can include the wheel spacers and lugnuts that I used. $800 shipped.
Hellwig rear swaybar-add on swaybar for rear. $85 shipped. SOLD
Firestone ride rite airbags for rear-$100 shipped.SOLD
The rear shocks in the picture were for the rear drop which was the axle flip kit. The rear drop is 4'', you flip the axle on top of the leafs and then I used the add a leaf to lift back up 2''. I don't have the flip kit in the picture yet. I do have it off the truck, it consists of the axle perches, ubolts and ubolt plates. The shocks and flip kit I will sell together. $100 shipped.SOLD
Stillen slotted drilled rear rotors with hawk brake pads. $85 shipped.
Spc upper control arms-$300 shipped.SOLD
Dirt king tierod ends-$100 SOLD
CXJ IMS-$75 shipped.SOLD
Steering rack bushings poly-SOLD
Rear leaf spring bushings poly-$40 SOLD
Stainless steel bed tie downs-$50 shipped.
Volant intake 12540 fits 2008-up 4.0l-$150 shipped.SOLD
Stillen grounding kit-$45 SOLD
Led third brake light-$20 shipped.SOLD
Prg short shifter 6 speed-$150 shipped.SOLD
Stillen underdrive crank pulley with shorter belts-$85 shipped.SOLD
FXR retrofitted headlights 2009-up-$300 shipped.SOLD
h-11 5000k hid foglight kit-$75 shipped
Titan aluminum diff cover for m226-$50 SOLD
Katzkin leather covers front and rear red and black red stitching for king cab-$500 shipped.
Hypertech speedometer calibrator-$100 shipped.
Weathertech floorliners black front and rear king cab-$100 shipped. SOLD
2009 and up center piece below radio for dual gauges with autometer oil pressure gauge-$85 shipped.
Pathfinder interior pieces, gauge cluster lid, pass side dash vent, upper glovebox-$100 shipped
OEM tinted tailights-$75 shipped
4 ultili track bed tie down cleats-$85 SOLD
I will post more pics as I get more parts off.
I will take paypal for payment. PM for offers and details.
http://www.clubfrontier.org/forums/...6-album692-whoredout06-album-picture27593.jpg
Afe twisted steel shorty headers-stainless steel only had them on my truck for about a month. $500 shipped.SOLD
Prg 2 leaf add a leaf 2'' lift. $75 shipped.SOLD
Biokustoms 2'' drop spindles-these give you 2'' drop bolt right on and keep alignment in spec-they are stock spindles that have been modified for a 2'' drop. $500 shipped.SOLD
Qa1 custom length coilovers-these are the coilovers I had in conjunction with the drop spindles to get 3'' of drop in the front of my truck. The coilovers by themselves will give you about an inch or so of drop. The upper mounts bolt right into the coil bucket. I can sell these separately or with the drop spindles. $300 shipped.SOLD
Prg motor mounts 75 shipped.SOLD
AP racing big brake kit front-13'' rotor, 4 piston, this kit will fit 18'' or larger wheels, not sure a bout 17'' wheels. I used a 1/4'' wheel spacer to make my wheels clear the caliper. The rotors are slotted and drilled and the pads have plenty of wear left on them. This is the big brake made for the frontier. I can include the wheel spacers and lugnuts that I used. $800 shipped.
Hellwig rear swaybar-add on swaybar for rear. $85 shipped. SOLD
Firestone ride rite airbags for rear-$100 shipped.SOLD
The rear shocks in the picture were for the rear drop which was the axle flip kit. The rear drop is 4'', you flip the axle on top of the leafs and then I used the add a leaf to lift back up 2''. I don't have the flip kit in the picture yet. I do have it off the truck, it consists of the axle perches, ubolts and ubolt plates. The shocks and flip kit I will sell together. $100 shipped.SOLD
Stillen slotted drilled rear rotors with hawk brake pads. $85 shipped.
Spc upper control arms-$300 shipped.SOLD
Dirt king tierod ends-$100 SOLD
CXJ IMS-$75 shipped.SOLD
Steering rack bushings poly-SOLD
Rear leaf spring bushings poly-$40 SOLD
Stainless steel bed tie downs-$50 shipped.
Volant intake 12540 fits 2008-up 4.0l-$150 shipped.SOLD
Stillen grounding kit-$45 SOLD
Led third brake light-$20 shipped.SOLD
Prg short shifter 6 speed-$150 shipped.SOLD
Stillen underdrive crank pulley with shorter belts-$85 shipped.SOLD
FXR retrofitted headlights 2009-up-$300 shipped.SOLD
h-11 5000k hid foglight kit-$75 shipped
Titan aluminum diff cover for m226-$50 SOLD
Katzkin leather covers front and rear red and black red stitching for king cab-$500 shipped.
Hypertech speedometer calibrator-$100 shipped.
Weathertech floorliners black front and rear king cab-$100 shipped. SOLD
2009 and up center piece below radio for dual gauges with autometer oil pressure gauge-$85 shipped.
Pathfinder interior pieces, gauge cluster lid, pass side dash vent, upper glovebox-$100 shipped
OEM tinted tailights-$75 shipped
4 ultili track bed tie down cleats-$85 SOLD
I will post more pics as I get more parts off.
I will take paypal for payment. PM for offers and details.
