Hey all, I have a new 2025 Frontier Pro-4X. I want to tap into the fuse box (in cabin) to power a Uniden R7 radar detector. Problem is documentation on the cabin fuses are very limited. I know that I want to tie into a switched fuse (only power with key on), so I have two questions, first does anyone have a picture from the service manual of the internal cabin fuse box and two, which fuse would you guys tap into? Thanks for any advice.
rcbarr.personal
When you open the panel for the cabin fuses, there's a diagram on the inside of the panel/cover telling you what they're for. Additionally: 2023 Us Nissan Frontier fuse box diagram - StartMyCar
Seems to me like the "Dealer Options" or "Electronic Parts" ones could be used for this depending on the amperage.
Seems to me like the "Dealer Options" or "Electronic Parts" ones could be used for this depending on the amperage.
Are you familiar with this?
www.z1motorsports.com
it’s a Nissan factory aux wiring harness. This plugs into an unused connector just above the right kick panel. Once it’s plugged in you have an easy (and fused) circuit.
I installed one when I put in fog lights and used the key on wire to power the relay.
OEM Nissan Frontier / Titan D41 A61 Special Lighting Service Connector
www.z1motorsports.com
it’s a Nissan factory aux wiring harness. This plugs into an unused connector just above the right kick panel. Once it’s plugged in you have an easy (and fused) circuit.
I installed one when I put in fog lights and used the key on wire to power the relay.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
