Nissan Frontier Forum banner

2012 Frontier Power Window and Door lock conversion

11351 Views 8 Replies 5 Participants Last post by  14kc
Just want to share some photos with my 2012 Frontier S model King bed power window and door lock conversion installation. Had to buy cable lock conversion kit on top of the power door lock kit.

Driver door:

<a href=""><img src="" title="source:" /></a>

Passenger door:

<a href=""><img src="" title="source:" /></a>
1 - 4 of 9 Posts
I bought all the kits from Amazon. You can buy any power window kits and door kits. But, I would but one that comes with control buttons for the power windows. I ended up buying XO Vision because it came with the switches. But a good quality brand would the the SPAL that's made in Italy. But it doesn't come with switches. And you have to buy separate switches.

As for the door, if I have a choice and if I knew from the start, I would buy a kit that's for cable type lock install of metal rod type. The one I bought is for metal rods and I have to buy a cable lock conversion kit for it.

I like this kit because the key fob is very nicely built.
See less See more
Too late. I have already covered everything. I can help if you send me question, I guess.
Power window door button. Power door lock button installed at the dash area. Added double din radio. Added strut channel for bike mount. Added Raid Covers.


See less See more
1 - 4 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.