Nissan Frontier Forum banner

2010 Pro-4X in Houston, TX

3943 Views 8 Replies 8 Participants Last post by  06nismoKC
Hi all, purchased my 2010 PRO-4X 4x4 Night Armor CC back in Oct 09. Loaded with the PRO-4X Value Package, Sliding Bed Extender, IPOD Interface (which doesn't work fully w/my 5th gen Nano w/o an adapter), Embroidered Floor Mats (kewl) and a dealer installed "Security Package" (what a joke). Stickered for $33,480. Traded in a 2006 F-150 Supercab Lariat. I've found this forum to be a great tool in adding the following:

Extang Trifecta Tonneau Cover
3M "Nano-Ceramic" Tint
Auto Dimming Homelink/Compass/Temp Mirror
OEM 2009-10 GPS Flip-Up Housing
Garmin 750w/custom startup screen from someone here
OEM Wireless Keypad
Valley Hitch
OEM 7-pin Trailer Harness (Relocated, of course)
OEM All-Weather Mats (In my excitement, I ordered the KC version .. Sigh.)
Hunter Bull Bar
Hunter Blade Step Boards
KC Long Range Lights
OEM Bug Deflector (just doesn't fit quite right ... had to finagle it)
and last but not least ...
Heavy Chrome (???) Nismo License Frame

I plan to add a small 2" spacer/1.5" shackle lift, maybe figure out how to install the auto headlight, definitely an auto-start system and perhaps spruce up the interior with the Pathfinder window switch covers and that'll about do it. :)

Enough yapping. Here's some pics ...

Jeff Wu
2010 PRO-4X CC 4x4


See less See more
1 - 2 of 9 Posts
Yes, I installed mirror. There are two identical PN#s GENK50A and the GENK51A. 50A has the Mito harness which is plug and play. GEN51A has the generic Gentex harness which requires you to wire up your own connector. But, for $70 cheaper, I'll insert my own pins. Don't forget to also buy the Gentex Telescoping Wire Cover.

+12 Constant and Ground was installed in the headliner. +12 Switched was routed to the driver's side junction box. I can't remember which wire I tapped into, but you can find the wire color on this forum.

Temp probe was located in the factory location ... front of the center radiator brace.

2010 Pro-4x CC 4x4
1 - 2 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.