Nissan Frontier Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
2009 Nissan Frontier SE 4x4 4.0L v6

My code reader is showing code C1104, a fault for the Front LH wheel speed sensor. I can also read the data from the sensors. The speed sensors from the other three wheels work, but the Front Left reads a zero. You can see it here on the imgur link below:

Imgur: The most awesome images on the Internet

On the troubleshooting list for this sensor, the service manual says to look for problems at terminals 45 and 46 on connector E125. I've also uploaded a pic of the service manual:

Imgur: The most awesome images on the Internet

Has anyone dealt with this before?
 

·
Registered
Joined
·
4 Posts
Yes, I am dealing with this now.
I dont have a code reader but my ABS and SLIP lights are on.

I did a multimeter test from E125 to each ABS sensor. Its strange ... I get continuity, but 3 of 4 read at ~38Mohm, and 1 (the NEW part!) reads at .465 Mohms. I've read these are ACTIVE sensors so a simple resistance test doesnt tell the whole story.
 
1 - 3 of 3 Posts
Top