Nissan Frontier Forum banner

2007 Locking Diff question

743 Views 10 Replies 4 Participants Last post by  R00
Hello from southern Louisiana! OK, so we have a 2007 2wd frontier with the nismo pkg on it. It has a dash button to lock the rear diff. When we pushed the button, a light within the button would light up momentarily but go away within a few seconds. Jacked up truck, removed spare, and noticed that coming from the trucks electrical system there were 2 open connections to the rear end. When i tried to connect them it seemed like the axel housing had the wrong connectors. Off to the shop...... Mechanic told me that 1 connection is a speed sensor (all good and now plugged in correctly) and that the other is the electric connection that actually energizes the locking mechanism. The problem is this, evidentally inside the chunk there is a magnetic system that has a wire coming from it that goes to a port in the housing of the chunk. At that point, this connection plugs into an adapter plug that is inserted into the housing from the outside. This is my problem, I NEED THIS PLUG. Mine is broken and this is why i cant plug my connector coming from trucks electrical system into this adapter. Nissan has it pinpointed on a schematic as item # 10 but they say they cant get it. Any information on this issue/problem would greatly be appreciated!!!
1 - 1 of 11 Posts
Well crud, I was hoping to be able to do this myself. Anyway, while ive got you online, I found 2 more female wiring connectors under the back end of the truck. Trailer wiring connectors??
Yes those are for trailer wiring.
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top