Hello, looking for advice on what options I may have on replacing my hubs for “easier” maintenance ones. Getting rid of the factory spacers and pressed hubs to make lowering the truck more do-able. To put the idea/plan out there, looking to turn the truck into maybe a mini drift truck. Any ideas are appreciated thank you 🙏
1st gen 2wd replacing/swapping front hubs
1 - 2 of 2 Posts
That's right ...!!
I got a first gen frontier d22 mini drift truck... I still got original hubs, but replace the rotors and the spindle my spindle is a 2-in drop spindle by belltech. It gets rid of the link from the tie rod and connects directly to the spindle. Truck handles awesome replaced entire front end , ball joints, tie rods, stabilizer bar, stabilizer bar links, center steering link, truck was a little bouncy before I replaced the front end. I go Beltech all the way.
![Wheel Tire Car Vehicle Plant]()
I got a first gen frontier d22 mini drift truck... I still got original hubs, but replace the rotors and the spindle my spindle is a 2-in drop spindle by belltech. It gets rid of the link from the tie rod and connects directly to the spindle. Truck handles awesome replaced entire front end , ball joints, tie rods, stabilizer bar, stabilizer bar links, center steering link, truck was a little bouncy before I replaced the front end. I go Beltech all the way.
1 - 2 of 2 Posts
