[Hawairish]

Looks great, Are any of the rears different widths? I’m having a hard time finding info on that.

I don't have hard numbers handy, but I recall the 31-spline axles (C200, H233B) being about 0.75" wider than the H190A, and the 33-spline axles (H233B) being about 4" wider than the 31-splines. The only exception is the 31-spine H233B from 99-00 Frontiers, which are the same width as the 33-spline axle versions. I can measure up all those axles if you need true numbers.

 

[Flatsix]

Thanks. I bought a set of used 4wd flares and wheels for my 2000 reg cab not knowing this. The 4wd is way wider

 

[Hawairish]

Thanks. I bought a set of used 4wd flares and wheels for my 2000 reg cab not knowing this. The 4wd is way wider

Yeah, a bit wider, but not terribly. 2" per side isn't too noticeable, as Nissan kept high-offset wheels on the 4wd models anyway. The wider axle and flares would go well together, but would surely just need some spacers up front to match the stance.

 

[ToastyBass]

Hey Hawairish, that's truly incredible work you've done! I have a quick side question; would you still happen to have the H190A diff and axle? What I've got is a '75 B210 and it's getting a KA24DE and 5-speed, I've been having a heck of a time finding a good axle. I can't seem to find H190's anywhere (that's what I'd prefer, a minor upgrade that'll handle the torque better than an H150), and I've been considering using something like a C200.

I know this isn't Frontier-related except for the fact that the H190 was used in them early on, I have a '22 KC that I love, she's been very faithful. Thanks in advance!

 

[Hawairish]

Hey Hawairish, that's truly incredible work you've done! I have a quick side question; would you still happen to have the H190A diff and axle? What I've got is a '75 B210 and it's getting a KA24DE and 5-speed, I've been having a heck of a time finding a good axle. I can't seem to find H190's anywhere (that's what I'd prefer, a minor upgrade that'll handle the torque better than an H150), and I've been considering using something like a C200.

I know this isn't Frontier-related except for the fact that the H190 was used in them early on, I have a '22 KC that I love, she's been very faithful. Thanks in advance!

Thanks for the compliment! I do still have the axle, just chilling on the side of the house. I keep thinking I'll do something with it beyond tripping over it. You anywhere near AZ?

 

[ToastyBass]

My brother, you won't believe this, but I live in Scottsdale!