Search Results for ‘torsion bar’

Almost everything new or rebuilt. Getting some of the old stuff out was nightmarish. Found this bushing press on Amazon for $120. 20+ sleeves, 4 bolts with roller bearing washers. Worked on the rear lower control arm chassis bushing. Sleeves also fit and pressed new bearing races and seals...

Cleaning up torsion bars while replacing control arms—notice the current set up is wrong according to the factory service manual, which appears to show that the L and R marks should face rearward and the torsion bars direction arrow showing outward rotation from the top when viewed from the...

Ok- 2002 with 251,000 miles with 31x10.50x15 BFG tires. I bought it from the original owner. It's been at OEM settings, truck always got repaired at the dealership The lower Ball joints went out & I tore the driver upper tie-rod rubber boot during removal, so i decided to replace all around...

Hey guys, been doing a front end rebuild on my '04 4wd, and I made the mistake of not marking either side of the torsion bar before removal, to install an new LCA. Pretty new at this stuff, I imagine there is a specific angle both the key and the LCA need to be at for the torsion bar to work...