Nissan Frontier Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 25 Results
  1. Parts
    Radflo 2.0 shocks for frontier or xterra. These are titan swap length, but could work for similar height non titan swap. 24" eye to eye. No leaks and willing to ship.
    $300 USD
  2. Parts
    I have 2 TRAKMOTIVE NI8433 CV axles. I used them for my titan swap for 2 months. I just M205 swapped so I don't need these any more. No shipping. I'm located in Rochester, MN but I'm in the twin cities fairly often so I can meet there too.
    $100 USD
  3. Parts
    These are extended travel that have been modified to work for a titan swap. They are 17.5" with a 1/2" spacer on top, the internal spacer has been removed. They will not give you quite as much travel as purpose built titan swap coilovers. About 25k miles on them. 600lb springs.
    $850 USD
  4. Parts
    Spc upper control arms OEM lower control arms PRG extended brake and tie rods CJD extended r180 half shafts Camber bolts (No coil-overs)(No rear lift)
    $1,000 USD
  5. Buy/Sell/Trade
    Spc upper control arms OEM lower control arms PRG extended brake and tie rods CJD extended r180 half shafts Camber bolts (No coil-overs)(No rear lift) Everything listed is brand new still in the box. I had the intention of installing all of this and just never got around to it. $1000
    $1,000 USD
  6. 2nd Gen - Lighting / Electrical / Wiring
    I have been working on a nissan frontier titan swap and have swapped everything over. I am now running into a roadblock that is a U1000 error code signaling a ECM communications error. In the process of my swap I had to swap the dash wiring harness and the engine room harness from a different...
  7. Parts
    Hey guys, I'm looking to sell a set of titan swap radflo 2.5" front coilovers with 600# springs. I ordered them back in July for preparation for a Moab trip in November. They did not make it until 3 weeks after my trip. I no longer have a use for them, and am hoping to sell to someone else...
  8. 2nd Gen - Suspension
    Hey y’all, just a quick question about building my 2014 desert runner. I am on the fence about doing the Titan swap to my truck. I am looking for long travel preferably 12”-15” of travel. I am trying to find a “cost friendly” option. Preferably would like to stay in the range of $2500-$3000. But...
  9. OffRoad / 4x4
    Hey guys, got my titan swap usable for a Moab trip this year. Anyone else spend much time down there with these trucks? Made it through fins n things, poison spider, golden spike, and gold bar rim. This time around.
  10. Vehicles
    Just wanted to see roughly how much it would go for. I spend virtually no time offroad any more with my job, so I'm considering other options. Truck has 167k miles. Exterior paint is "fair" to "good" condition; interior is "good" condition. Here are the specs and mods: Titan swap with Radflo...
  11. 2nd Gen - Suspension
    Hello all, I am new here this is my first post. But I am very interested in doing a Titan Swap on my frontier. Could anybody help me who has done it before, or knows everything about it? I am on a $1500 budget, is that even possible? My truck is a 2wd Desert Runner. If someone could provide me...
  12. 2nd Gen - Wheels, Tires, and Brakes
    I have not posted in a while on the forum but I thought I would share with the group that I am making the jump to 35 inch tires. To do this, you obviously need to run a large enough lift kit to clear the 35s, commit to trimming your front and rear fenders, and re-gear to a lower gear ratio. So...
  13. 2nd Gen Frontier Builds
    Username: 14hippozukehauler Year: 2014 Make: Nissan Model: Frontier Trim: SV 4X4 Color: Hippo Grey Mods: T swap (including M205, spindles hubs and brakes) Interior: stock Exterior: stock Drivetrain: stock Suspension & Tires: Titan swap, general grabber 35X12.50s on level8 MK6’s Armor:stock...
  14. 2nd Gen - DIY - Do It Yourself / Tech Tips
    Anyone have suggestions as to what snap ring groove to run in with a tundra bilstien and custom tophat? I'll be using 4runner springs and want about 3 inches of lift out of it.
  15. 2nd Gen - Suspension
    Hello. I have a 2009 LE 4x4. I am currently running 275/70 r18 wheels and tires, so basically 33s. I would like to get a bigger more aggressive look. I have been reading the threads on here but I know nothing about lift kits and it’s pretty overwhelming. I believe there is a small lift on the...
  16. 2nd Gen - Suspension
    I am a member over on thenissanpath.com but I wanted to share my rig with you guys since this has not happened quite a lot in the Nissan community. Here is my 2009 Nissan Pathfinder: I have installed a 6 inch Rough Country drop bracket lift kit from the Nissan Frontier and did a titan swap...
  17. 2nd Gen - Suspension
    So I have a 2011 pro4 that I Tswapped about a year ago. Uca: spc Lca: new stock titan Coils: tswap 5100s from prg(2nd to bottom setting) not sure of spring rate Itr: stock titan Otr: prg heim Axles: extended r180 (pre-built) Tires: 285/70/17 Approx front height after swap Passenger side Hub to...
  18. New Member Introductions
    So I have a 2011 pro4 that I Tswapped about a year ago. Uca: spc Lca: new stock titan Coils: tswap 5100s from prg(2nd to bottom setting) not sure of spring rate Itr: stock titan Otr: prg heim Axles: extended r180 (pre-built) Tires: 285/70/17 Approx front height after swap Passenger side Hub to...
  19. 2nd Gen - Suspension
    So my front diff has some play, I stated looking for a parts truck or diff and found a Titan with a seized motor. Perfect donor truck for a Titan swap I know the A arms will fit but Im wondering about the diff and axles. Im also considering swapping hubs and rear axle aside from the spring...
  20. Parts
    Here's what's left after my t-swap. Everything is brand new from a Titan 4" lift https://www.roughcountry.com/nissan-suspension-lift-kit-874-20.html Local pick-up in Sacramento or Lodi. Shipping at buyer's expense. U-bolts - $10/set of four Sway Bar Extensions - 4" front - $10/pair Rough...
1-20 of 25 Results
Top