Nissan Frontier Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. 2nd Gen - DIY - Do It Yourself / Tech Tips
    Last weekend I rebuilt almost my whole front end plus rear shocks. I definitely learned the hard way that is better not to replace control arm bushings. 🤯🔫 The smart way is to just replace the whole control arm. I was stubborn about it because I wanted Moog serviceable ball joints and I also...
  2. 2nd Gen - Wheels, Tires, and Brakes
    2016. 86k miles. Had pulling right and shaky steering. Check all four tie rods: Lots of play on both side's inner and outer, but no clicking or bad boots. took off the boot of the inner tie rods and noticed left side is greasy dirty and right side is clean. SEE PICS So... I take it the...
  3. General Discussion
    I have a 2018 crew cab SV. OE shocks weren’t stout enough so I replaced them with Bilstein on front and rear. Now I have a noise over small bumps at low speeds. Auto shop says it’s not related to shocks/struts but likely in the steering gear. They can recreate the noise by tapping on the...
1-3 of 3 Results