Nissan Frontier Forum banner
radiator
1-7 of 7 Results
  1. Drivetrain Discussions
    Hey all, Well I love my truck, but it's been giving me headaches recently. I've got an overheating issue that I can't figure out. Back in November last yr it was getting too hot when I drove at highway speeds. The gauge went up to about 1/8th-3/16th inches to the 'too hot' line, so I replaced...
  2. DIY - Do It Yourself / Tech Tips
    I have a 2011 equator 2wd with the 4.0. The motor was overheating so I changed out the following. Water pump, thermostat, radiator, temp sensor, fan clutch and upper and lower radiator hoses. I installed all this pulled a vacuum on the system and filled the coolant with the vacuum. Shouldn’t...
  3. 1st Gen Hangout
    This was the greatest thing I have done to my D22 frontier. So many benefits* in this mod, its more than worth it for any trucks. . *Save gas *Increase water pump endurance. *Free-up Horsepower. *Reduce engine warm-up time. *Increase acceleration, quick throttle response. *Less noise, more...
  4. DIY - Do It Yourself / Tech Tips
    hey all, I have a ‘03 V6 crew cab With a bad oil leak, white smoke exhaust, and constant overheating. I can’t seem to find the leak anywhere. my engine bay is just a mess and I don‘t even think I have a dipstick for my oil. Would it need an engine rebuild? The guy who had it before me looks like...
  5. DIY - Do It Yourself / Tech Tips
    I'm looking for help in diagnosing a coolant problem. I have read many discussions of similar problems, but now it's happening to me. A couple of weeks ago, I had a few sluggish starts and the temp gauge started fluctuating, so I changed the thermostat in my 2008 Frontier, 4L V6, 2WD, SE...
  6. Parts
    My beloved 2000 Frontier (bought new) was totaled by a new college student who didn't know where they were going back in late August, and I never got around installing the new radiator. I ended up with a Tacoma, so I don't need it. It's a Denso 2213400. I've never even taken it out of the box...
  7. General Discussion
    Yesterday, I got in my truck and started it. I heard a terrible noise coming from the front and shut it off. I was worried it was something to do with the valve train or timing chain. I started it back up hoping the noise would have gone, it didn't so I shut it off again. I decided to open the...
1-7 of 7 Results
Top