Nissan Frontier Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 23 Results
  1. New Member Introductions
    Just show casing my gen 3. Saying hello. I'm located in Southern Ontario Canada. Got my 4X in February. Added method wheels, 17", K02's in a 265-70, 2" All dog lift factory 4600 bilsteins. Prinsu roof rack with pelican cases. Overland racks Ontario bed rack. SDHQ brackets and diode dynamic SS2...
  2. 2nd Gen - Suspension
    I am looking to see if getting a leveling kit is worth it on my 2019 Frontier Pro4X, I have looked through the sticky on lift kits and have only seen front + back lifts on a Pro4X, I have been doing some reading throughout the forums but there doesn't seem to be a very clear answer if it is...
  3. 3rd Gen - Wheels, Tires, and Brakes
    hi, does anyone know the pro4x (non beadlock) stock wheel offset? looking for aftermarket wheels and wondering if a wheel with +18 offset would rub with no lift. i completely new to this whole deal so i apologize if my question is uneducated or redundant. thanks
  4. 3rd Generation General Discussion
    hey yall, looking to purchase new wheels for my 3rd gen but i am a complete novice when it comes to this subject. Does anybody know the stock offset of the pro 4x (non-beadlock) wheels? i dont have a lift and wanted wheels with a +18 offset and am worried about rubbing. any direction on...
  5. Boca Chica.jpg

    Starbase in Boca Chica TX.
  6. 3rd Gen Frontier Builds
    A little help needed, Can i fit 275/70/17's on the OEM wheel's? 2022 PRO4X stock is 265/70/17 also, anyone know if the Rough Country 2.5" lift kit worth spending $200 on or should i just consider a full lift kit? MODS DONE SO FAR: UNDER CONSTRUCTION* Matte black hood decal / 3 Trumpet Truck...
  7. New Member Introductions
    So I know rough country says the 6 inch lift won’t work for the Pro4x model due to it causing wear and tear on parts but I’m wondering if there’s other parts I could use instead that won’t cause wear and tear.
  8. Wanted
    Looking for factory beadlock style wheels. With or without tires. I can pay extra for tires if included. located in central Oklahoma. Can travel up to 250 miles meet. thanks.
    $700 USD
  9. Wanted
    Looking for some m226 axle shafts for my frontier with the m226 and elocker. Only really need the drivers side/left axle shaft but I would not turn down a set of both driver and passenger side. The drivers side is currently on national backorder it seems. Let me know what you have thanks...
    $100 USD
  10. 2nd Gen - Audio / Video
    Looking to upgrade my stereo in the future to a Sony XAVAX1000, are there any mods I have to complete to work with the Rockford Fosgate system in my 2018 Pro4X? Anything I will lose completing the switch? Also looking for the best Steering control adapter. Thanks, Sam
  11. 2nd Gen - Drivetrain Discussions
    Hi guys so my clutch recently started slipping under load mainly on freeway, i have about 123k on her (2012 pro4x).. soo i obviously want something a little stronger clutch wise, so i decided to go with the centerforce II that being said the disc diameter is 10.4"/ 264mm. Now i wanted to also go...
  12. Parts
    $500 16" OEM wheels/tires 265/75/16 Hankook Dynapro ATM My take-offs with only 15,000 miles on them, no scratches on the wheels whatsoever. They do NOT have sensors. I also have the lug nuts with wheel locks. This is a good deal, the wheels alone are worth more! Someone come get em!! Corpus...
  13. Parts
    16 inch Pro4x wheels and factory 265/75/16 Hankook ATM tires. Only 16,000 miles on these tires, no scratches on the wheels. Includes lug nuts & wheel locks. I will balance them fresh for you. If you prefer black letters I can also flip them for you. Corpus Christi, TX area.
  14. Buy/Sell/Trade
    I have all sorts of stuff laying around from various projects (jump seat delete, rear bumper). See something you need? Come and get it! Located in San Jose, CA. Pictured: KC rear cab plastic panel KC rear headrest (only one, sorry) KC rear seatbelts KC rear seats Rear bumper cover Rear bumper...
  15. New Member Introductions
    Hi everyone. I recently bought a 2015 Frontier Pro4X. I'm pretty excited about it and looking to make some upgrades to the truck to make it the mountain/desert truck of my dreams. I was told today by a seemingly reputable mechanic that the pro4x can't be lifted because of issues it would cause...
  16. 2nd Gen - DIY - Do It Yourself / Tech Tips
    I'm trying to replace the right rear ABS/Speed sensor for my 2010 Pro4X. I bought one that was supposed to be the correct one from Rock Auto, but it's not. I don't want to do that again, so looking for some help... Which one(s) are correct? Should be pretty straight forward but the one I bought...
  17. 2nd Gen Frontier Builds
    Got my small lift installed and fitted my 33’s, lift was AllDogs Off-road RCKilla kit, 2” front and 1.5” rear, just a little height and leveling. Did the kit myself In the drive and it went fairly well, springs on the coil overs were an adventure though, probably won’t be doing those myself...
  18. 2nd Gen - Exterior
    Hope you guys like this option to make your own tie downs and let me know if you have any questions!
  19. Buy/Sell/Trade
    Looking for a set of Pro4X charcoal wheels from 2014 and up Frontier With good tires is a plus. Close to Nashville area or willing to ship.
1-20 of 23 Results