Nissan Frontier Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 28 Results
  1. 3rd Gen - Suspension
    Just installed Rough country lift over the weekend. Ride is just as good if not better than stock. ADO UCAs RC Loaded Struts RC Rear shocks and shackles Falken Wildpeak at3 285/70/17
  2. 2nd Gen - Suspension
    I have a 2011 Frontier with a 6" Fabtech lift. Tierod ends are shot. These are custom to the lift. Fabtech quit making the kit and the tierod end mfg is out of business. In short, I can't find a replacement and vehicle is not safe. I talked to Fabtech and the guy I spoke with said he had...
  3. 1st Gen Hangout
    Hello, I'm looking to add a 2-3 inch lift to the front of my frontier as I just added bigger wheels and it is now rubbing. Please give me some recommendations on lift kits.
  4. 2nd Gen - Suspension
    Hello! First post here, my truck is a 2010 Frontier LE crew cab 5ft bed. I currently have a 2.5" rough country strut/shackle/shock leveling kit. I adore how it improved the overall appearance, but my ride quality is a tad on the stiff side. They don't call it rough country for nothing, lol. Is...
  5. 3rd Gen - Suspension
    Was curious to get some ones take on the Rough Country 2.5” Lift (SKU 8673). The kit that utilizes the shocks and struts and not just the front spacer. I ran their 3.5” kit (replaced shocks and struts) on my 21’ Rebel I had and I loved it, slightly different setup for that vehicle. I’m just...
  6. 2nd Gen - Suspension
    My 2016 SV I bought a year and a half ago came with a fabtech 6 inch lift from the previous owner. According to the lift installer I guess you have to make cuts in the subframe. So if I wanted to drop to just a 2.5 inch lift would it be impossible now? If so any way I can get any components that...
  7. 2nd Gen - Wheels, Tires, and Brakes
    Ok going to finally lift my 2010. I have the LE with the stock 18" wheels that I plan on keeping, but want to upgrade the tires to 33" tires.... I asked tirerack about the size and they said 275/70/18. My question is, with doing a 2.5" lift, how much will I have to cut? Anyone have issues with...
  8. 2nd Gen - Suspension
    Hey so I recently had a 2.5 inch Dobinson IMS lift put onto my 2011 Frontier with SPC upper control arms. Theres quite a bit of positive camber as expected, my question is are the SPC's sufficient to fix the camber or are adjustable CAM bolts also needed? Worst case I'll put the CAM bolts on...
  9. 2nd Gen - Suspension
    ...a couple inches makes a world of difference. Result of Pathfinder V8 springs, Bilstein 5100s set to the first lift position (ie 2nd notch from the bottom), 25mm extended UCA ball joints, and camber bolts: Truck is sitting at the wheel well at 37.5" in back, 36.125" in front. This...
  10. 2nd Gen - Suspension
    Finally got around to installing my ADO add-a-leafs. The directions were honestly inaequate: No mention of shocks topping-out at full extension before the axle comes loose from the leafpack Leaving out unhooking brake lines and ABS wires from their hooks No itemized step for removing the...
  11. Parts
    I have a set of used Bilstein 5100s, front and rear. The front shocks come with Old man Emu's light duty coils installed. This setup was installed last fall and has about 2,000 miles on it. It provided ~ 2.5 inches of lift on my 2010 PRO-4X. My wife drives the truck and wasn't a fan of the...
  12. 4 Banger Lounge
    I have a 2019 Nissan Frontier king cab s. Basically the most base model you can get. I was wondering is there any kit out there that can add more clearance to my truck. Looking to add bigger tires to my truck and information would help. Thank you!
  13. Towing
    Hello! I recently bought a 2014 Frontier, which I plan to use to tow a small camper/trailer. I'm a newbie to towing, but I know the trailer is supposed to be as level as possible. I recently picked up my (new to me) trailer, and despite the hitch and receiver initially being level, when I...
  14. 2nd Gen - Suspension
    So far I have an All Dogs Offroad 1.5" rear leaf pack for the back and a full set of camber bolts for the front, neither installed yet. My goal is mild lift and a significant potential increase in articulation for better offroad performance, while maintaining reasonable towing and on-road...
  15. New Member Introductions
    Hi everyone. I recently bought a 2015 Frontier Pro4X. I'm pretty excited about it and looking to make some upgrades to the truck to make it the mountain/desert truck of my dreams. I was told today by a seemingly reputable mechanic that the pro4x can't be lifted because of issues it would cause...
  16. OffRoad / 4x4
    Hey guys, I had a great time in the sand with my pro4x a couple months back. I have the stock hankook tires and honestly they do amazing in the sand still even with over 50k miles on them and getting pretty bald. Getting duratracs in the coming weeks so I am super excited for that. If anyone has...
  17. 2nd Gen - Suspension
    How’s it going, I currently have the RC 6 inch lift with bilstein struts set at 1.5 inches of lift and am running 22s and 35s. I’ve been wanting to lift my truck higher for a while, but just don’t want to do a body lift. I was wondering if anyone has any ideas, my thoughts are either: A: lift...
  18. 2nd Gen - Wheels, Tires, and Brakes
    I plan on getting the Rough Country 6" lift for my 2018 SV Also I want to get new wheels, and i'm not sure what size will fit with no major trimming. Just guessing, because i know nothing about offset, backspacing ETC, i was thinking about 17x9 +18 offset 5.6" backspacing, those specs are from...
  19. 2nd Gen - Exterior
    Have a 2000 crewcab im wanting to lift and modify but no idea where to start. Most lifts shops ive been to dont have anything for my year model any ideas would be very helpful
1-19 of 28 Results
Top