Nissan Frontier Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 25 Results
  1. Parts
    For a Nissan 2nd Gen. Frontier 1 pair of PRG 1.5 blocks. If you need assistance, DM me and I’ll point you to the right direction for proper U bolts. Willing to ship if you pay for it.
    $35 USD
  2. 2nd Gen - Suspension
    2008 XE 2.5L I4 2WD planning to lift about 2 inches Front Struts and Rear Shocks: Bilstein 5100s On the link above they assemble them on the stock setting and say their springs add...
  3. 2nd Gen - Suspension
    I am planning to use this kit to lift my truck a little bit. Do I need to buy these cam bolts to go with it...
  4. 2nd Gen - Suspension
    Hey y’all. Finally got around to tossing in my ADO medium coils and ADO Broverland leafs. My 2017 CC is basically stock save for the hefty alloy skids and a bed rack. As it sits unloaded the truck essentially sits on the overload leafs of the Broverlands. My stock springs with a single AAL had...
  5. Buy/Sell/Trade
    Spc upper control arms OEM lower control arms PRG extended brake and tie rods CJD extended r180 half shafts Camber bolts (No coil-overs)(No rear lift) Everything listed is brand new still in the box. I had the intention of installing all of this and just never got around to it. $1000
    $1,000 USD
  6. 3rd Gen - Suspension
    Was curious to get some ones take on the Rough Country 2.5” Lift (SKU 8673). The kit that utilizes the shocks and struts and not just the front spacer. I ran their 3.5” kit (replaced shocks and struts) on my 21’ Rebel I had and I loved it, slightly different setup for that vehicle. I’m just...
  7. OffRoad / 4x4
    Hello everyone. So I’ve been doing a lot of research about specific lift kits. I feel that I’ve landed on the “complete lift kit with bilstein 5100’s” from alldogs offroad. This kit comes with pretty much everything i will need to achieve the roughly 2” lift I’m after and I’ll be able to fit...
  8. New Member Introductions
    Howdy! Just joined up. So I’m looking to lift my ‘19 Frontier SL CC 4X4. I just wanted to get some opinions. I’m not really looking to do anything too crazy, I’d just like a little bit more height to fit slightly larger tires (maybe 32-33” max) and a bit more travel overall. I’ve seen some kits...
  9. 3rd Gen - Suspension
    first post on here, ive been lurking for weeks using every inch of these forums to answer a million little questions I've had about my new 2022 frontier.. so, I ordered a 2.5 inch spacer lift last week and have installed it on my truck. I did not adequately research the issues that frontiers...
  10. 3rd Gen - Suspension
    Just lifted my 2022 SV 4x4 Crew (long bed), I thought I'd throw pictures up here if anyone wanted to see. I went with the Rough Country 2.5" strut lift. (Loaded struts in the front, shackle and shocks in the back) I went up a size in tire as well to the Cooper AT3 at 265/70/R17 on the stock rims.
  11. 2nd Gen - Suspension
    Hello, all I've recently installed the All Dogs Offroad complete lift kit with Bilstein 5100's and All Dogs Offroad brand coil springs & leaves. The kit gave me about 2" of lift all around, and restored the factory rake to the truck. Overall the road manners are about the same as the factory...
  12. 2nd Gen - Suspension
    What up all, I've recently started the first mods to my truck (2012 SV 4x4, Manual, completely stock before starting this project) and am having some issues. Hoping someone more knowledgeable might know what I've got wrong here. I got the 3" extended travel Radflo kit from Nisstec with 600lb...
  13. Navara - International
    Hi guyz, I am new here, from Europe with Pathfinder R51, but it's kinda sister to Frontier, so I guess here's quite a pool of knowledge. I've installed 2-inch OME suspension lift kit, with full new struts, shocks, coils on my Pathfinder. As old were worn out and compressed, difference now is...
  14. 1st Gen Hangout
    I have 2004 Frontier, 4x4 sc. Just bought it in August but I've been at work so haven't seen it in person yet 😅. Will be next week. I'm thinking about doing a lift. At the very least I will crank the torsion bar as explained in the pinned post on torsion bars. But I was also considering...
  15. Parts
    Camber bolts SOLD, pending payment. Shackles are SOLD. Spacers are SOLD. Link to PRG product page. Link to OEM camber bolts.
  16. 2nd Gen - Suspension
    So I'm trying to lift my 2015 SV Crew Cab but still keep the rake in the back. I do a lot of towing since my truck is a service truck. Does anyone know of a lift with good tire/wheel setup I can run. My main goal is to have a small lift, but atill be able to tow what the front end not shooting...
  17. 2nd Gen - Suspension
    Hello, I plan on lifting my 2016 frontier with the Bilstein 5100 set at 1.5inches. I was wondering if I do need to get adjustable cam bolts like the ones from PRG.
  18. 2nd Gen - Suspension
    Been thinking about lifting my 2018 Frontier club cab 4x4. Saw one with a 6 inch lift on 33's and can't decide. Anyone done this or have suggestions? Thought about slight offsets too.
  19. 1st Gen Hangout
    I’m looking for a decent lift kit around $1,000 that’ll give me some good clearance to possibly fit 35’s I have a 2004 rwd crew cab with 6ft extended bed. Thank you for your help in advance!
  20. OffRoad / 4x4
    Good afternoon everyone, I have been looking at lifts for my 2018 Fronty Pro-4X, and trying to get something decent here in Ontario has been awful :confused:. I am looking for a 1.5-2.5" lift I know finding something like the PRG or Nisstec lifts would be the best thing I could get but getting...
1-20 of 25 Results