Nissan Frontier Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 27 Results
  1. General Discussion
    Installed a Pioneer radio Model number MVHS21BT Radio works great but now the dash lights will not come on, I have identified the illumination control wire (Pink) and the illumination lighting switch wire(Blue). In a previous post I created people said I could just leave those wires out of the...
  2. General Discussion
    I have a 2012 4.0 V6 automatic and the engine sounds kinda dry after sitting for more than 4 hours on start up and a little before shifting gears. The filter has a check valve and the engine has oil. Any ideas? I can take videos if it helps. Thank you in advance!
  3. 1st Gen Hangout
    Realized my truck has been a lot more bouncy lately and was pulling off to one side so I took it in for a check in. They told me it needed an alignment but also that it needed new shocks since the ones in are worn (OEM). I was just wondering for the shocks is getting original parts the best and...
  4. 2nd Gen - Drivetrain Discussions
    I'll try to be as brief but descriptive as possible: 2010 SE Manual 6spd Installed a K&N CAI maybe in May/June I get a weird acceleration pattern when trying to put the pedal to the metal. The truck will rev to 2500-3k rpm before dipping slightly, and then revving higher, it's almost like...
  5. 2nd Gen - DIY - Do It Yourself / Tech Tips
    what's up ladles and jellybeans. I believe my transfer case has finally crapped out on me. some of the symptoms look like transmission issues but I already have a rebuild kit for that and know my way around a transmission fairly well. I've never cracked open a T-case though. for anyone that's...
  6. 1st Gen Hangout
    I was just looking through my engine and noticed a small black tube that connects to the air cleaner box and connects some place further down. It seemed to be of need of a replacement but I don't even know what it does. It seems like a sensor of some sort maybe and I can't find the tube in any...
  7. 1st Gen Hangout
    Hello. I ran into some weird problems yesterday and today. While I was driving I noticed a sulfur smell coming from my exhaust. My mind jumped to my catalytic converter going back and that I needed to go get it checked up on. However, driving today I noticed while idling with the AC on I would...
  8. 1st Gen Hangout
    I was looking to change my oxygen sensor and was trying to find where they were located. I have a 2003 2.3L and I know one is on the ride side of the engine but I was looking for the downstream one as well. Also I was wondering what was the best place to get two replacements from that would work...
  9. 1st Gen Hangout
    Just today as I was backing up into a parking spot I noticed a sulfur smell coming from my exhaust when my foot was on the gas, that seems to be the only issue I can notice. I know this can be a sign of a bad catalytic converter but I was wondering if it could be anything else. I know I need to...
  10. 1st Gen Hangout
    So I managed to find a 1999 king cab frontier with basically no rust, I snapped it up and after getting home I noticed a few things that I'm not sure if its stock or not. Its late now but tomorrow I will get photos. Firstly, the door sticker claims my engine is a 6vg5, after googling that engine...
  11. 2nd Gen - Drivetrain Discussions
    I have an 08 Frontier its the crew cab 4x4 SE. its got the 4.0 v6. I was helping a buddy out and pulling a trailer at highway speeds approx. 65 to 80 miles an hour for an extended time. My buddy asked about a towing mode and I told him i didn't have one so we turned off the overdrive setting...
  12. 1st Gen Hangout
    I have searched forums and tried to problem solve myself, but i haven't fixed the misfire. I have the 3.3 l v6, which we bought from a buddy, it had been sitting for a while but started right up without any issues. After we got it home the truck developed a misfire on multiple cylinders. I have...
  13. 2nd Gen - DIY - Do It Yourself / Tech Tips
    Alright after replacing the ac compressor, drier, expansion valve, and every o ring and putting in new refrigerant it worked perfectly the air blew cold, then after day 5 the ac blew less and less cold and eventually I started hearing a hissing noise coming from the passenger side glove...
  14. 2nd Gen - Lighting / Electrical / Wiring
    First of all does a 2016 2.5l even have a ac relay? I ask because my new compressor’s clutch is not engaging when I tired to recharge the system. The fuse is good next thing I went for is the relay but I couldn’t find it. Anyone know?
  15. 2nd Gen - Wheels, Tires, and Brakes
    I have a 2005 Frontier XE and today I started bleeding the brakes myself for the first time. I did not keep the master cylinder topped up the whole time which I know is a mistake so I stopped the brake bleeding job half way through. Only got the 2 rear tires bled. The pedal gets nice and firm...
  16. 2nd Gen - Drivetrain Discussions
    Nissan Frontier D40 error p0101, does not drive well. (qr25de) 2016 Once in the morning an error was displayed. I read it, it showed p0101. Erased, she reappears after 1-2 miles. In this case, it does not matter whether the error is lit or not, the speed is limited to 70 ml / h. Acceleration...
  17. 2nd Gen - Exterior
    The roll up bed cover for my truck came with only 1 lock lever installed on one side. Isn't there supposed to be one on each side? Over time the aluminum wore off the cover track and it will not lock anymore. I moved it to the other side and it's locking pretty good for now. Does anyone know...
  18. 2nd Gen Frontier Builds
    Hello, my name is Dillon. I have a 2012 Nissan Frontier SV. Ive had a love/hate relationship with this truck because I’ve had to dump a lotta money into it and I’m a poor college kid. I’ve also listed it for sale. So feel free to try and convince me otherwise. And/or give advice on a next move...
  19. General Discussion
    Has anyone ever has issues going into reverse? It takes a high RPM for it to clunk into reverse. Sometimes it’ll do it smoothly, other times it takes me giving it gas. If you watch the back drive shaft, it makes a clicking noise and it swivels back and forth until i give it enough gas for it to...
1-19 of 27 Results
Top